Listing ID #3778219
Company Information
Ask for more detail from the seller
Contact SupplierSilver Tubes is one of the prominent in exporting & stocking of Alloy 20 Sheets, plates, coils, etc., which provides highly safe and reliable operations. The surface of flame-hardened Alloy 20 Sheets is likely to have poorer wear resistance than the carbon-rich case of a carburized steel of equal hardness. Exceptions are nitrided parts in Alloy 20 Plates, which have better wear resistance than would be expected from the carbon content alone. Fully hardened-and-tempered, low-carbon Alloy 20 Coils have a good combination of strength and toughness, both at room and low temperature. Care must be taken in heat treatment of Carpenter 20 Sheets, however, because toughness may be decreased substantially by temper brittleness. In Carpenter 20 Plates, a form of embrittlement is developed by slow cooling through the range of 900 Degree F to 600 Degree F, or by holding or tempering in this range.
Alloy 20 HR/CR Sheets, Plates and Coils, Suppliers of ASTM B463 Carpenter 20 Sheet, Plate and Coil, ASME SB463 Alloy 20 Perforated Sheet, UNS N08020 Chequered Plate, Exporters of Alloy 20 Shim Sheet, Dealers of DIN 2.4660 Alloy 20 Corrosion Resistant Plate, Alloy 20 Slitting Coil, Alloy 20 Plain Sheet, Alloy 20 Perforated Coils Stockists and Stockholders in India.
For any combination of Carpenter 20 Coils and heat treatment, three factors tend to decrease toughness: low service temperature, high loading rates, and stress concentrations or residual stress. Nickel, aluminium, and silicon in UNS N08020 Sheets are examples of the elements that form compounds in the steel. While in a molten state, these UNS N08020 Plates are exposed to a vacuum which removes hydrogen and, to a lesser degree, oxygen and nitrogen. Tungsten and vanadium will form carbides in UNS N08020 Coils, both of which increase the hardness and stability of the finished product.
Distributors of Alloy 20 Foils, Alloy 20 Circles, Alloy 20 Strip, Alloy 20 Flats, Alloy 20 Angle, Alloy 20 Ring Traders, Alloy 20 Blank, B463 Alloy 20 Cold Rolled Sheets, Alloy 20 Hot Rolled Plates, Manufactures of High Quality Incoloy Alloy 20 Sheet, Plate and Coil.
Alloy 20 Sheet Stock, ASTM B463 Incoloy Alloy 20 Sheets, ASME SB463 Carpenter 20 Sheet, Alloy 20 Plain Sheet, Alloy 20 Shim Sheet, DIN 2.4660 Alloy 20 Polished Sheet, Alloy 20 Perforated Sheet, 2B Finish Alloy 20 Sheet exporters, Mirror Finish Alloy 20 Sheet, Buy High Quality Alloy N08020 Sheets Suppliers and distributors.
ALLOY 20 PLATES, ALLOY 20 SHEETS, ALLOY 20 COILS VALUE ADDED SERVICES:
Alloy 20 Chemical Composition
Grade | Ni | C | Mo | Mn | Si | Fe | P | S | Cr | Nb | Cu |
Alloy 20 | 32 – 38 | 0.02 max | 2 – 3 | 1 – 2 | 0.7 max | Bal | 0.02 max | 0.005 max | 19 – 21 | 0.1 – 0.3 | 3 – 4 |
Alloy 20 Mechanical Properties
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
8.1 g/cm3 | 1443 °C (2430 °F) | Psi – 35000 , MPa – 241 | Psi – 80000 , MPa – 551 | 30 % |