1. Apply Star™ Neutralizer on the surface already applied with Star™ Gel™ / Star™ Spray / Star™ Dip / Star™ Pass-1 
   at the time when water washing is required to be done..
   
2. Now apply Star™ Neutralizer with any brush on the Star™ product applied surface and kept it for 5-10 minutes.
   Star™ Neutralizer used for application should be of same quantity as previously applied Star™ product on that area.

1. Then, wash the surface is with water. After removal of the water-insoluble materials (by decanting), the remaining liquid can be discharged into the municipal sewage system, without further treatment.
   
2. If the above application method is not suitable (on processing point of view), then collect the rinse water in a
   separate suitable tank. Add Star™ Neutralizer to that rinse water till its pH becomes 7 or more. Filter this treated solution to remove water insoluble materials or decanted and then the remaining liquid can be safely discharged into municipal sewage system, without further treatment.
   
3. The water insoluble precipitates generate in very small percent quantity and needs to be stored in a separate plastic bag. This bag must be safely stored as untreatable effluent product. It can be stored by making a cubical brick pit in the ground and the plastic bag needs to be placed in that brick pit.

Note: The information provided is based on our current level of knowledge. It is given in good faith but it is not intended to guarantee any particular properties. The users must satisfy themselves that there are no circumstances requiring additional information or precautions or verification of details given herein.

1. Apply Star™ Neutralizer on the surface already applied with Star™ Gel™ / Star™ Spray / Star™ Dip / Star™ Pass-1 
   at the time when water washing is required to be done..
   
2. Now apply Star™ Neutralizer with any brush on the Star™ product applied surface and kept it for 5-10 minutes.
   Star™ Neutralizer used for application should be of same quantity as previously applied Star™ product on that area.

1. Then, wash the surface is with water. After removal of the water-insoluble materials (by decanting), the remaining liquid can be discharged into the municipal sewage system, without further treatment.
   
2. If the above application method is not suitable (on processing point of view), then collect the rinse water in a
   separate suitable tank. Add Star™ Neutralizer to that rinse water till its pH becomes 7 or more. Filter this treated solution to remove water insoluble materials or decanted and then the remaining liquid can be safely discharged into municipal sewage system, without further treatment.
   
3. The water insoluble precipitates generate in very small percent quantity and needs to be stored in a separate plastic bag. This bag must be safely stored as untreatable effluent product. It can be stored by making a cubical brick pit in the ground and the plastic bag needs to be placed in that brick pit.

Note: The information provided is based on our current level of knowledge. It is given in good faith but it is not intended to guarantee any particular properties. The users must satisfy themselves that there are no circumstances requiring additional information or precautions or verification of details given herein.