Neoshield Pu Paints

Listing ID #4246723

Description:

NEOSHIELD PU Paints are 2 part polyurethane based top coat offering good resistance to chemical, UV. These products are designed to offer best gloss retention. The product has got excellent adhesion strength and also offers a balanced aesthetic and corrosion protection. NEOSHIELD PU Paints are available in Clear / High Glossy / Semi Glossy varieties. Special products with non yellowing fetaures are also available. These products cure at Room temperature and provides excellent flexibility, toughness, good abrasion, chemical & UV resistance.

Surface Preparation:

Abrasive blasting to Sa 2 ½ Swedish standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3. The surface should be absolutely dry, moisture and oil free before primer application. And for Application on Primer scuff with 100 no type’s emery paper for proper bonding and performance.

Application Method:

Stir the Base part thoroughly. Mix base and Hardener as per our recommended ratio, by volume, Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Add suggested Thinner into mix, if required, depending on application method, and stir gently for few minutes. Stain the paint through nylon filter cloth of 300 mesh size and apply uniformly over the surface. All equipment used for above should be properly cleaned. Apply By Brush/By Conventional spray.