Listing ID #4260625
Company Information
Ask for more detail from the seller
Contact SupplierPneumatic Clamping system, with built-in patented disk-clamping design (Taiwan PAT.: 217736) to ensure cutting endurance. | |
The feature of wear resistant alloy Dual-Lead Worm Gear is high mechanical efficiency of power transmission, high indexing accuracy and easy adjusted on the backlash. | |
Able to be connected with CNC machine to perform synchronous 5th axis multi-angle machining. | |
Able to be connected with CNC machine to perform tilting angle machine (4+1 axis) through Single Axis Controller. | |
Minimum Indexing Degree: 0.001° | |
Tilting range: +/- 110 °   |
Model | TTD-125 | TTD-255H | |||||
Tilt range | +110°~ -110° | +110°~ -110° | |||||
Spindle outer dia. | Ø60 | - | |||||
Table dia. | - | Ø255 | |||||
Table height at 0X position | 233 | 334.5 | |||||
Center height at 90X position | 160 | 220 | |||||
Center bore | Nose dia. | Ø25 | Ø30 | ||||
Thru dia. | Ø22 | Ø30 | |||||
Table T-solt width* | - | 12H7 | |||||
Guide block width | 14H7 | 18H7 | |||||
Servo motor | Rotary | Tilting | Rotary | Tilting | |||
FANUC | a2i | a4i | a8i | a8i | |||
MELDAS | HA33 | HA40 | HA80 | HA80 | |||
Inertia converted into motor shaft |
X10-3kg.m2 [X10-3kgf.cm.sec2] |
0.31 (3.1) |
0.52 (5.3) |
||||
Speed reduction ratio | 1:90 | 1:90 | 1:120 | 1:180 | |||
Max. table rotation speed (3000 r.p.m.) |
33.3 | 33.3 | 25 | 16.7 | |||
Clamp system supplied pressure |
Pneumatic 0.6MPa 5kgf/cm2 |
Hydraulic3.5MPa 35kgf/cm2 |
|||||
Clamp torque |
N-m [kgf-m] |
78 ( 8) |
157 ( 16) |
588 ( 60) |
686 ( 70) |
||
Indexing accuracy (cumulative) | arc sec. | 45 | 60 | 15 | 45 | ||
Repeatability | arc sec. | 4 | 4 | 4 | 4 | ||
Net weight | kg | 95 | 330 | ||||
Allowable wheel torque (Rotary axis) |
N-m [kgf-m] | 120(12) | 490(50) | ||||
Allowable work weight | 0° tilt angle | kg | 35 | 120 | |||
0°~90° tilt angle | kg | 20 | 70 | ||||
Allowable work moment | WxL |
N-m [kgf-m] |
156(16) | 470(48) | |||
Allowable load when table clamped |
F |
N [kgf] |
343(35) | 1170(120) | |||
FxL |
N-m [kgf-m] |
78.4(8) | 470(48) | ||||
FxL |
N-m [kgf-m] |
156(16) | 470(48) | ||||
Allowable work inertia | J=WD2/8 |
kg-m2 [kg.cm.sec2] |
0.18(1.7) | 0.7(6.9) | |||
Dimension(download)- JIF File | TTD 125 | TTD 255H | |||||
Dimension(download)- PDF File | TTD 125 | TTD 255H |
Model (Unit:mm) | TDM-170 | ||
Clamp Method | Pneumatic 5kg/cm2 | ||
Faceplate Dimension | p170 | ||
Spindle Through Hole Diameter | p45 | ||
Faceplate Center Hole Diameter | p50H7 | ||
Center High | 170 | ||
Faceplate T Solt Width | 12H7 | ||
Position Key | 18h7 | ||
Servo Motor | Rotate Axis | Tilting Axis | |
FANUC | \3/\4i/\8i | Manual | |
MELDAS | HA40/HF053T | ||
Min. Speed Reduction Ratio | 0.001° | 5' | |
Total Speed Reduction Ratio | 1/90 | ||
Indexing Accuracy (Cumulative)(Arc. Sec.) | 30" | ||
Repeatability (Arc.Sec.) | 4" | ||
Clamp Force (kgf/m) | 16 | ||
Max. Torque Capacity of Worm Gear (kfg/m) | 27 | ||
Tilting Angle | 0°~90° | ||
Max. Workpiece of Capacity (kg) |
Vertical (with tailstock) |
75 (150) |
|
Horizontal | 150 | ||
Net Weight (without motor) (Kg) | 90 | ||
Dimension(download)- JIF File | TDM-170 | ||
Dimension(download)- PDF File | TDM-170 |