Natural LDPE BASELL 2427F Granule for Industrial Use

Listing ID #7493936

Product Description

Lupolen 2427 H is an additivated, low density polyethylene. It contains an antioxidant, slip and anti-blocking agent. It is characterized by a good balance between processability and mechanical properties. Films made from Lupolen 2427 H exhibit good optical properties. It is delivered in pellet form

This product is not intended for use in medical and pharmaceutical applications.

Status :- Commercial: Active

Availability :- Africa-Middle East; Asia-Pacific; Europe

Application :- Bags & Pouches; Food Packaging Film; Hygiene Film; Liner Film; Shrink Film

Market :- Flexible Packaging

Processing Method :- Blown Film; Cast Film

Attribute :- Antioxidant; Good Heat Seal; Good Optical Properties; Good Processability; Low

Friction; Unspecified Antiblocking; Unspecified Slip

Processing Techniques

Users should determine the conditions necessary to obtain optimum product properties and suitability of the product for the intended application. In cases where higher temperatures are required, please contact your appropriate technical contact for support.

Health and Safety

The resin is manufactured to the highest standards, but special requirements apply to certain applications such as food end-use contact and direct medical use. For specific information on regulatory compliance contact your local representative.

Workers should be protected from the possibility of skin or eye contact with molten polymer. Safety glasses are suggested as a minimal precaution to prevent mechanical or thermal injury to the eyes.

Molten polymer may be degraded if it is exposed to air during any of the processing and off-line operations. The products of degradation may have an unpleasant odor. In higher concentrations they may cause irritation of the mucus membranes. Fabrication areas should be ventilated to carry away fumes or vapours. Legislation on the control of emissions and pollution prevention should be observed.

The resin will burn when supplied with excess heat and oxygen. It should be handled and stored away fromcontact with direct flames and/or ignition sources. While burning, the resin contributes high heat and may generate a dense black smoke.

Conveying:

Conveying equipment should be designed to prevent production and accumulation of fines and dust particles that are contained in polymer resins. These particles can under certain conditions pose an explosion hazard. Conveying systems should be grounded, equipped with adequate filters and regularly inspected for leaks.

Storage:

The resin is packed in 25 kg bags, octabins or bulk containers protecting it from contamination. If it is stored under certain conditions, i. e. if there are large fluctuations in ambient temperature and the atmospheric humidity is high, moisture may condense inside the packaging. Under these circumstances, it is recommended to dry the resin before use. Unfavorable storage conditions may also intensify the resin's slight characteristic odor.Resin should be protected from direct sunlight, temperatures above 40°C and high atmospheric humidity during

storage. Higher storage temperatures may reduce the storage time. The information submitted is based on our current knowledge and experience. In view of the many factors that may affect processing and application, these data do not relieve processors of the responsibility of carrying out their own tests and experiments; neither do they imply any legally binding assurance of certain properties or of

suitability for a specific purpose. This information does not remove the obligation of the customer to inspect the material on arrival and notify us of any faults immediately. It is the responsibility of those to whom we supply our products to ensure that any proprietary rights and existing laws and legislation are observed