Product Description

Lupolen 2421 H is is an additivated, low density polyethylene. It is characterized by a good balance between processability and mechanical properties. Films made from Lupolen 2421 H exhibit good optical properties. It contains an antioxidant and is delivered in pellet form

This product is not intended for use in medical and pharmaceutical applications

Status :- Commercial: Active

Availability :- Africa-Middle East; Asia-Pacific; Europe

Application :- Bags & Pouches; Food Packaging Film; Hygiene Film; Liner Film; Shrink Film

Market :- Flexible Packaging

Processing Method :- Blown Film; Cast Film

Attribute :-Antioxidant; General Purpose; Good Heat Seal; Good Optical Properties; Good

Processability

Processing Techniques

Users should determine the conditions necessary to obtain optimum product properties and suitability of the product for the intended application. In cases where higher temperatures are required, please contact your appropriate technical contact for support.

Health and Safety:

The resin is manufactured to the highest standards, but special requirements apply to certain applications such as food end-use contact and direct medical use. For specific information on regulatory compliance contact your local representative Workers should be protected from the possibility of skin or eye contact with molten polymer. Safety glasses are suggested as a minimal precaution to prevent mechanical or thermal injury to the eyes.

Molten polymer may be degraded if it is exposed to air during any of the processing and off-line operations. The products of degradation may have an unpleasant odor. In higher concentrations they may cause irritation of the mucus membranes. Fabrication areas should be ventilated to carry away fumes or vapours. Legislation on the control of emissions and pollution prevention should be observed.

The resin will burn when supplied with excess heat and oxygen. It should be handled and stored away from contact with direct flames and/or ignition sources. While burning, the resin contributes high heat and may generate a dense black smoke

Recycled resins may have previously been used as packaging for, or may have otherwise been in contact with, hazardous goods. Converters are responsible for taking all necessary precautions to ensure that recycled resins are safe for continued use.

Product Description

Lupolen 2421 H is is an additivated, low density polyethylene. It is characterized by a good balance between processability and mechanical properties. Films made from Lupolen 2421 H exhibit good optical properties. It contains an antioxidant and is delivered in pellet form

This product is not intended for use in medical and pharmaceutical applications

Status :- Commercial: Active

Availability :- Africa-Middle East; Asia-Pacific; Europe

Application :- Bags & Pouches; Food Packaging Film; Hygiene Film; Liner Film; Shrink Film

Market :- Flexible Packaging

Processing Method :- Blown Film; Cast Film

Attribute :-Antioxidant; General Purpose; Good Heat Seal; Good Optical Properties; Good

Processability

Processing Techniques

Users should determine the conditions necessary to obtain optimum product properties and suitability of the product for the intended application. In cases where higher temperatures are required, please contact your appropriate technical contact for support.

Health and Safety:

The resin is manufactured to the highest standards, but special requirements apply to certain applications such as food end-use contact and direct medical use. For specific information on regulatory compliance contact your local representative Workers should be protected from the possibility of skin or eye contact with molten polymer. Safety glasses are suggested as a minimal precaution to prevent mechanical or thermal injury to the eyes.

Molten polymer may be degraded if it is exposed to air during any of the processing and off-line operations. The products of degradation may have an unpleasant odor. In higher concentrations they may cause irritation of the mucus membranes. Fabrication areas should be ventilated to carry away fumes or vapours. Legislation on the control of emissions and pollution prevention should be observed.

The resin will burn when supplied with excess heat and oxygen. It should be handled and stored away from contact with direct flames and/or ignition sources. While burning, the resin contributes high heat and may generate a dense black smoke

Recycled resins may have previously been used as packaging for, or may have otherwise been in contact with, hazardous goods. Converters are responsible for taking all necessary precautions to ensure that recycled resins are safe for continued use.