MYMIX BONDING AGENT

MYMIX Bonding Agent APB 110 is a synthetic rubber compound which is mixed with all kinds of Cementitious Systems to make installation of natural stone and tiles on interior & exterior walls. It improves bond strength, thermal shock resistance and flexibility to substrate area.

All concrete surfaces should be clean from dust, free from contamination, efflorescence, and curing compounds

• High bonding with resistance to thermal shock
• Increased tensile and compressive strength
• It is suitable for all types of tiles and natural stone

• Shake well before use.
• Add MYMIX Bonding agent APB 110 in clean bucket, add Sand and Cement mortar (Ratio 1:1).
• Use approx. 15 ltrs to 50kg of Sand and Cement mortar (Ratio 1:1).
• Mix by hand or slow speed stirrer to get a smooth and homogeneous mixture and wait for 5 mins.
• Remix and apply the materials with proper notched trowel.

• Apply material to the recommended substrate with flat side of trowel.
• Comb on additional material with the notched side.
• Press the tile/stones within 15-20 min with a shuffling movement into the adhesive.
• Check regularly to ensure that the back of the tile is in full contact with the adhesive.
• Remove excess adhesive immediately from the joints.
• The proper preparation of the surface will make the fixing easier and quicker 

• Suitable for Interior and Exterior
• All types Stones for cladding
• Cement mortar & Screeds
• Used in bonding for plaster work by bond coat
• Can use old to new concrete substrate by bonding mortar
• Cement baker board

• Available in 1 Liter, 5 Liter, 20 Liter.
• Bigger packing sizes are available on request.

• Best before 12 months from the date of manufacturing, in unopened condition and stored in dry area.
• Avoid direct sun light.