MYCROCORE CIA630 Waterproofing Chemical

MYCROCORE CIA630

MYCROCORE CIA630 advanced is acrylic modified elastomeric waterproofing system for exterior horizontal as well as vertical surface. It is 1K acrylic based liquid membrane, ease in application directly apply with the help of brush/roller. It has excellent properties to withstand pressure up to 3 bars of positive waterproofing pressure on vertical surface and 5 bars of positive waterproofing pressure on horizontal surface.

Technical information: 60% +2% solid contents

Uses:

• Waterproofing on roofs

• Waterproofing of balconies, terrace and verandas

• Waterproofing of all type of old and new concrete

• Waterproofing and protection of concrete construction like bridge-decks, tunnels, stadium stands etc

Application

• Cleaning and surface preparation: Clean all the surface to the sound base which is to be treated with MYCROCORECIA630 advanced. Remove dust, oil, laitance any other chemicals oil etc.

• Crack Filling: Fill the cracks if present on the substrate with MYCROSEAL Exterior properly.

• MYCROPRIME: Priming of the substrate must be done with MYCROPRIME because priming the surface before waterproofing will provide better adhesion to the substrate and increase durability of waterproofing system.

• Mix MYCROCORE CIA630 advanced well before use. Apply the mix with the help of brush on the prepared surface. After first coat dry apply 2nd coat immediately to get better adhesion between two coats. Allow the coating for full cure until 24 hours. Areas subjected to moderate and heavy loads/hydrostatic pressure; minimum 1mm thickness coating is recommended for further information you can contact MAYFAIR BIOTECH expert team.

Coverage: The approximate coverage at even consistency with brush application It will cover minimum 8sq.ft /kg for horizontal surface and 15sq.ft / kg for vertical surface in 1st coat and 24sq.ft/kg in 2nd coat Actual coverage will depends on the texture of the surface and no. of coatings.

Packages: 1L, 5L, 10L and 20 L