Company Information
Member Since 7 Years
Nature of Business RetailerAsk for more detail from the seller
Contact Supplier
Multicrop Thresher Tested for wheat and maize (All in One)
Duration of test : One day i.e. on 23/06/2013 including specification checking and performance evaluation against threshing of wheat and maize crop.
Safety and finishing : Finishing and colour was acceptable. Safety provision at the feeding point was lacking.
Ease of operation : Easy to connect with the power source and easy to operate.
Ease of repair and maintenance: Maintenance is required in every season with respect to greasing, oiling 81. change of blade.
Defects & Breakdown observed. : No breakdown was observed during test period. if any
| Output capacity : | 40 q/hr with straw |
| Threshing efficiency : | 96% |
| Grain breakage : | 1.5% |
| Cleaning efficiency : | 98% |
| % of unthreshed grain : | Negligible |
| % of grain blown : | Negligible |
| Overall length: | 4318 mm |
| Overall width : | 1524 mm |
| Overall height : | 2108 mm |
| Length of frame : | 4290 mm |
| Width of frame : | 1080 mm |
| Height of frame : | 865 mm |
| Main frame channel : | 125 x 65 x 8mm |
| Main frame angle : | 65 x 65 x 8mm |
| Support (Lower) frame angle: | 65x 65x 6mm |
| Sheet (Main Body) : | 12 gauge |
| Fly wheel cover sheet : | 10 gauge |
| Matching power source . : | 30 hp |
| N0. of bearing : | 23 |
| Bearing No. on main shaft : | 6312, UPC-213 |
| Feeding system : | Manual |
| Feeding hopper/ Chute : | 812 x460 mm |
| No. of fan : | 03 |
| No. of fly wheel : | 01 |
| Size of two fan : | 914 x 203 x 2 mm |
| Size of third fan : | 914 x 157 x 1.6 mm |
| Wheel axle length : | 3350 (63 mm dia) |
| No. of sieve : | 02 |
| Size of hole for wheat : | 13 No. (upper), 6N0. (lower) |
| Size of hole for maize : | 20No. (upper), 6N0. (lower) |
| No. of fan blade for straw knots : | 12 |
| No. of stud for straw : | 28 |
| Length of stud for straw : | 140 mm |
| Length of standard for straw knots : | 114 mm |
| Size of threshing concave (D x L) : | 838 x 1830 mm |
| Size of threshing drum (Dx L) : | 560x1778 mm |
| Threshing cylinder speed : | 550—700 rpm |
| No. of beater : | 68 |
| Dimension of each beater : | 114 x 38 x 6mm |
| Shaft length : | 3350 mm |
| Shaft dia : | 63 mm |
| No. of knife (blade) section on threshing cylinder : | 06 |
| Clearance between concave & drum : | 10 mm |
| No. of fan belt for power transmission : | 03 |
| Size of fan belt : | PC 102 (3 Pc); DB 66 (1 Pc) |
| Overall weight of thresher : | 1325kg |
| Make / Trade name | Star Agro Industries | |
| 3. | Applicant | M/s Star Agro Industries At+PO— Domohana, District — Uttar Dinajpur (West Bengal) |
| 4. | Manufacturer | Applicant is the manufacturer in this case. |
| 5. | Type of test | Specification checking and operational test. |
| 6. | Date of test | 23/06/2013 |
| 7. | Mode of selection | Machine supplied by the manufacturer at the test site |
| 8. | Tractor used for test | MF 5245 DI |
| 9. | Test Engineer | Er. Sanjay Kr. Choudhary, College of Agricultural Engineering, Pusa |
Connect with us
For Buyer 
For Seller 
Help 
Karandighi, Uttar Dinajpur, West Bengal 
Send Enquiry