Mud Pumps

Special Features

• Excellent quick automatic action without foot valve up to 8 mtrs.
• Auto suction lift upto 18 feet.
• Automatic air release during priming.
• Back pull out design, so easy maintainance without disturbing pipe lines.
• Dynamically balanced rotating parts ensure less vibrations.
• Better efficiency because of good hydraulic design.
• Minimum parts, fast repairing at low cost, Also pump is available at economical rate.
• Available in Bare, Coupled, Monobloc, Belt driven version.
• Also offered pump with trolley / trailer to move it from one place to another.
• Less expensive & easily available spares.
• Available in gland & mechanical seal as per customer's requirements.
• simple construction, only two moving parts.
• Easy inspection of impeller.
• Large diameter of solids handled . up to 50 mm.
• High resistance. to abrasive liquids the wear plate is easily replaced and impeller are also available in s.s. Alloy 20, Polypropeline etc
• Easy to install :- only the suction hose is immersed in the liquid, The pump can be set up high and dry in the most convenient position for inspection and maintenance.
• Long Life :- The parts subject to wear can be easily replaced one or more times to restore the original performance.

• Public utilities :- For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.
• Dewatering Basements, Trenches, Construction sites.
• Onboard shift, as bildge, for desk wash & engine cooling.
• Tiles & Marble factories, effluent plants.
• Mobile Machinery : Cooling water for marine engines and shovels.
• Any application where priming is to be avoided.
• Industry : Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum product or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty.
• Civil engineering : Flood drainage; sewage pumping; fire fighting; recovery of dangerous liquids.
• Naval duty :- Loading and unloading; bilge pumping; washing, fire fighting, stripping, sanitary duty and circulation.
• Waste treatment : Pumping polluted, hot or corrosive waster water containing sand, mud or solids in suspension; dosing neutralising liquids; pumping out settled sludge.
• Construction industry : Dewatering excavation, canals or ponds; ground water dewatering with wellpoint system or drains; water supply from wells or canals; hosing down concrete castings.
• Agriculture : Surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilisers, distribution of liquid animal feed; transfer of must; washing.

• Liquid containing sand mud or solids in suspension with pH from 5-13, smoke scrubbing; water emulsion for machine tools or grinders, cutting or quenching fluid circulation, cooling water circulation in steel mills or drawing mills; neutralising liquid dosage, pumping out settled sludge, sump pumping liquid manure transfer and circilation
• Water circulation in paint spray booths; stripping fuel tanks circulation
• Recovery of dirty solvents
• Transfer of light petroleum product such as diesel fuel, paraffin, kerosene and petrol (gasoline)
• Liquid fertiliser transfer, circulation and spraying, brackish or sea water containing sand
• Brackish or sea water washing, cooling or fire fighting in ports; auxiliary duties on board
• Marine duty; brine, sea intake and circulation of sea water in swimming pools
• Pumping out acid waster, transfer, of dilute acids; fruit juice or fluid food products
• Recovery of spills from chemical plant; transfer or circulation of caustic soda or potash
• At Drilling Rigs

Note : Special Pumps for Higher Capacity and Head available on request.

• CASING : CAST IRON / SS-304 (CF-8) SS-316 (CF-8M)
• IMPELLER : CAST IRON / CF-8 / CF-8M / BRONZE
• DIFFUSER : CAST IRON / CF-8 CF-8M /BRONZE S
• SHAFT : EN-8 / SS-304 / SS -316
• SLEEVE : SS-410 / SS-304 / SS-316 / BRONZE
• BEARING HOUSING : CAST IRON
• SEALING : TIWA /CARBON - CERAMIC SEAL / TC-TC SEAL