Listing ID #4111798
Company Information
Ask for more detail from the seller
Contact SupplierWidth: 300 mm to 1800 mm in steps of 50 mm. Â
Length : Open or endless upto 200 mtrs in single length Â
Fabrics plies : 2 plies to 8 pliesÂ
Fabrics : Polyster Nylon (EP) EP 100, EP 125, EP 150, EP 200, EP 250, EP 300, EP 350 , EP 400 and EP 450Â
Nylon Nylon (NN) NN 100, NN 125, NN 150, NN 200, NN 250, NN 300, NN 350, NN 400 and NN 450. Â
Cotton Cotton 28 OZ, 32 OZ, 36 OZ, 42 OZ, 48 OZ and for elevator belts 34 OZ.
XÂ Mechanical Fasteners not recommended.
For Specific requirements not covered in above table, please contact with details. The figures mentioned above are approximate values for consideration for drive design. and are subjected to change without notice in the make of fresh developments.Â
Cover Grades : Cover type Tensile strength Elongation at break General Applications Specific.
Kg/cm2 (Min.) (% Min.)
M-24 240 450 Suitable for rugged services for conveying crushed Metallic ores, Lime stone, Granite etc. Also suitable for large size ores. IS-1891, (Part-I)-1994Â
N-17Â 170Â 400 Suitable for Materials, like Asbestos, Ash, Bauxite, Cement lime etc. IS-1891, (Part-1)-1994Â
HR(T1) 125 350Â Suitable for Transporting hot material (Upto 125oC for coarse material and 100oC for fine material)Â IS-1891, (Part 2)Â
SHR(T2) 125 350 Suitable for transporting hot material (Upto 150oC for coarse material and 125oC for fine material)Â IS-1891, (Part 2)Â
OR (Oil Resistant) 120 250 Cover Grade of specially blended synthetic Polymers is designed to give very high resistance to mineral vegetables and Animal Oils & Fats. IS-1891, (Part 3)Â
FR (Fire Resistant) 170 350 Recommended for use in surface applications in coal and such type of mines where the ambient temp. may not be high but there is distinct hazard of belts being enveloped in fire. Rubber covers are fire resistant and anti static. CAN/CSA/
M-422/ M-87 & IS-1891 (Part 5)
Covers thickness : 1mm to 12mm in steps of 0.5 mm Apart from straight ply construction the belts are offered in Stepped ply as well as Reverse stepped ply constructions also.  National and International Standards followed : 1. Bureau of Indian Standards BIS  Special features of MTS Conveyor Belts : 1. Unique Carcass Design & Assembly. |
||
 |  |
Â
Belt-Designation |
Max. Recommended Working-Tension (KN/M) |
Minimum Belt width for Adequate troughing (mm) |
||||
Type |
Belt-Rating |
Vulcanized joint |
Mechanical Fasteners |
Troughing Angle |
||
20° |
30° |
45° |
||||
General Duty |
200/2 |
20 |
20 |
300 |
400 |
400 |
Extra Duty |
315/3 |
31 |
31 |
400 |
500 |
500 |
Heavy Duty |
400/4 |
44 |
40 |
500 |
600 |
750 |