MS Cationic Bitumen Emulsion

Our company has a well-maintained data system that is absolutely secured and you can rely on that if you are willing to make payments online. With leading technologies, we make secured database to keep a stern check on the previous transactions. Our quality analysis system is headed by experienced quality auditors who check each and every product at different levels.
Key points : Does not require preheating Dries quickly for instant setting Longer shelf life Optimum viscosity Maintenance Mix This high quality material now makes it possible to fill pot holes or carry out patch repair with open graded cold premix made on site.The method typically used for the repair of pot holes using asphalt emulsion are throw-and roll and full-depth removal and replacement. All of these method involve placing cold mix in the pot hole with a shovel and compacting with a truck tire, vibratory plate compactor or steel wheeled roller. The procedure consists of Blow off water and debris from the pot hole. Cut to rectangular shapes with all sides vertical Remove loose material, if any Spray track coat of asphalt emulsion on all the side and bottom Mix prepared of clean (preferably washed) and dry aggregates with SPACE MS cationic bitumen emulsion Typically 13.2 mm and 11.2 mm sized aggregates mixed in 2:1 ratio SPACE MS cationic bitumen emulsion content of approximately 7% by weight of aggregates works best Mix aggregates and emulsion properly to ensure good and uniform coating Mix till entire emulsion is broken (turn to black in clor) Fill the premix immediately into the pot hole up to a level slightly higher than the adjoining road surface and roll properly Open the repaired pot hole to traffic as soon as workers and equipment are clear Premix Carpet For economical and fast construction of wearing course, emulsion is used for Premix Carpet. Ministry of Road Transport & Highway (MORTHEH) has also recommended use of emulsion