Listing ID #1251660
Company Information
Ask for more detail from the seller
Contact SupplierTechnical Specifications
Capacity | |
Capacity | 38mm |
Drilling Capacity in Solid | |
In Steel having 600 Mpa Tensile Strengh | 38mm |
In Cast Iron having 180BHN | 40mm |
Tapping Capacity | |
Metric Threads up to size [MM] | 30mm |
Any Other Threads [Inch] | 1-3/16" Fine Pitch |
Boring in Steel | |
Boring in Steel | 80mm |
Drilling in Head | |
Taper in Spindle - [Nose] | MT - 4 |
Spindle travels - [Auto/Manual] | 250mm |
Spindle Diameter at Front Bearing | 56mm |
RAM Diameter | 72mm |
No. of Spindle Speeds/Range | 8/65 - 1982 RPM |
No. of Auto Feeds [Rev./mm.] | 2/0.04 - 0.08 |
Rapid Feeds | |
Travel of Rail - [Vertical] | 750mm |
Travel of Drilling Head - [Horizontal] | 450mm Manual |
Electrical | |
Power Supply | 415V, 3 PHASE, 50Hz |
Drilling Head Two Speed Motor | 1.5HP, 1440 RPM |
Arm Elevating Motor | 0.5HP, 1440 RPM |
Coolant Pump | - |
Working Range | |
Drilling Radius Max | 895/440 |
Distance between Base Plate to Spindle Min/Max [Spindle Retracted] | 240/930 |
Distance From Column Face to Spindle Min/Max | 360/810 |
Max Drilling Head Traverse | 450MM |
Column Sleeve Diameter | 170mm |
Vertical Traverse of Arm [Auto] | 750mm |
Rotation of Arm [Both Side] | 0-180 Deg. |
Height1 | 850mm |
Base Plate | |
Working surface [L x W] | 820 X 660 |
Overall size | 1300 X 800 X 170 [R x S x Q] |
No. of T – Slots & Nominal size | 4/16 |
Weight with Standard Accessories[APPROX] Net/Cross | 800Kg |
General | |
'V' Belt Section of Spindle Drive Motor | B' 47 |
'V' Belt Section of Arm Elivater Motor | A' 23 |
Space Required by Machine [L x W x H ] | |
Space Required | 1300 X 2600 X 1900 |
Box Table Size [L x H x W ] | |
Box Table Size | 390 X 300 X 300 |
Color[S] | |
Color[S] | MMT Green (Special) |