Listing ID #3874287
Company Information
Ask for more detail from the seller
Contact SupplierTurret head tits 90o or L 45o front to back for compund and complex milling | |
• | X, Y & Z axes slidesways and table surface are hardended and ground |
•
|
Turcite X & Y axes |
•
|
Highly accurate hard chromed & ground quill |
•
|
Precision internally ground milling head |
•
|
High Precision pre-loaded class 7 angular contact bearings |
•
|
Spindle run out is within 5 ( microns symbol ) T. I. R. |
•
|
Double nut back lash eliminator on X, Y Axis |
•
|
Dovetail guideways fo 2S Models and wide square bedways on knee column and saddle knee for 4S, 5S |
•
|
Cetralised lubrication on all slideways |
Specifications of Milling Ram Turrret Type | |||
Models | 2S | 4S | 5S |
Working surface | 1065x230 | 1270x254 | 1372x254 |
longitudinal travel (manual) | 730 | 900 | 1010 |
longitudinal travel (Power feed) | 660 | 820 | 910 |
Cross travel | 305 | 405 | 405 |
Vertical travel | 405 | 460 | 460 |
Overarm travel | 460 | 460 | 520 |
T. slots (width x number) | 15.87x3 | 15.87x3 | 15.87 x3 |
Spindle speeds | 70 - 2280 R PM - 8 Steps | ||
Quill travel | 127 | ||
Ouil feed (per revolution of spindle) | 0.04 / 0.08 / 0.15 MM / REV | ||
Spindle taper | R8 | ISO-40 |
ISO-40 with 104 rnm spindle ø |
Table to spindle nose | 0-440 | 0-430 | 65-510 |
Head 45° inward IlF' | 0-285 | 50-488 | 50-488 |
Head 90° "F" | 171-482 | 190-612 | 190-612 |
Head 45° outward I1G" | 228-553 | 305-740 | 305-740 |
Overarm swivel | 3600 | 3600 | 3600 |
Swivel angle of spindle head R/l | 90° | 90° | 90° |
Vertical Spindle Motor | 2HP | 3 Hp | 3 HP |
Rapid traverse motor (Optional) | 3/4 HP | ||
Coolant pump (Optional) | 1/8 HP | 1/8 HP | 1/8 HP |
Net weight (Kgs.) | 950 | 1400 | 1500 |