Listing ID #6059949
Company Information
Ask for more detail from the seller
Contact SupplierCleaning and Disinfection Process (ANSI/AAMI ST79) | |
---|---|
Chemical sterilization for decontamination Liquid chemical sterilants include glutaraldehyde, hydrogen peroxide, hydrogen peroxide-peracetic acid combinations, sodium hypochlorite, and peracetic acid | Pass |
Thermal (hot water) disinfection • Washer-sanitizers, washer-decontaminators, utensil washers, and cart washers reduce microbial contamination by means of cleaning agents, hot water, rinsing, and drying. • Pasteurization equipment provides cleaning and high-level disinfection at water temperatures of 65°C to 77°C (150°F to 170°F) for a contact time of at least 30 minutes. • Washer-disinfectors provide a cycle of cleaning, rinsing, disinfection, and drying at temperatures that are usually higher than those of washer-sanitizers |
Pass |
Thermal sterilization for decontamination Saturated steam can be used to decontaminate devices capable of withstanding high temperatures (121°C to 135°C [250°F to 275°F]) and pressures (16 to 35 psig). Washer-sterilizers provide cleaning and rinsing followed by exposure to saturated steam at temperatures of 121°C to 135°C (250°F to 275°F). | Pass |
Ultrasonic cleaner 30 KHz for 30 min | Pass |
Dry heat sterilization 160°C for 2h, or 170°C for 1h, or 180°C for 30min | Pass |
Disinfection by light C wave ultraviolet and wavelength range is from 200nrn to 275nrn | Pass |
Detergent enzyme cleaner | Pass |
Autoclave sterilization 121°C and 115Kpa for 1000 cycles | Pass |
Installation instructions |
---|
Step1: The tag will be fixed with metal bracket, • Screws (Rivet hole, M3) • Pop rivets (3mm) |
Step2: The tag with bracket can be attached in several methods: • Screws (Rivet hole, M3) • Pop rivets (3mm) • Welding |
Product Dimensions and Weight | |
---|---|
Dimensions (mm) | 51 x 36.3 x 7.5 |
tolerance | +/- 0.5 mm |
Dimensions (in) | 2.01 x 1.43 x 0.30 |
tolerance | +/- 0.02 in |
Rivet hole diameter | 0.126 in +/-0.008 (3.2 mm +/- 0.2) |