Medium Voltage Oil Cooled Potential Transformer

Listing ID #6336200

Medium Voltage Oil Cooled Potential Transformers of single core for metering purpose are commonly used. Di-electric strength of the oil-impregnated paper insulation is preserved by hermetic sealing of the transformer.
Characteristics:

• Oil / Paper Insulation.
• High insulation reliability.
• Metal parts corrosion resistive.
• Porcelain bushing suitable for polluted atmosphere.
• Easily accessible to LV terminals.

Main features -

• The unique ‘filling’ composition of oil results in a compact design
• For measuring,protection and open delta with one or two or three or four secondaries
• Most standards available (IEC & IS)
• Highest voltage for equipment: 3.6 - 145 kV
• Rated voltage factor: 1.2 continuous & 1.5 for 30sec or 1.9 for 8hrs
• Rated Secondary Voltage: 110/√3V or 110V
• Frequency: 50 or 60 Hz
• All external iron parts are MS painted for protection against detrimental effects of atmosphere and chemicals
• Flexible design to meet special customer requirements such as high burden, creepage and high altitude
• All gaskets are below oil level ensuring positive oil sealing
• The winding is insulated with special paper, which has high mechanical and dielectric strength as well as low dielectric losses and good resistance to ageing.
• Heating in a vacuum dries the windings. After assembly, all free space in the transformer (approximately 60%) is filled with clean and dry quartz grains.
• The assembled transformer is vacuum-treated and impregnated with degassed mineral oil.