Listing ID #3918884
Company Information
Ask for more detail from the seller
Contact Supplierinherent characteristics of mdpe such as corrosion & crack resistant, tough and flexible makes polyethylene piping system the most preferred means for transportation and distribution of water, petrol and natural gases world wide.
material : the raw material used is medium density polyethylene (mdpe). bhagwati plastic & pipe industries manufactures pipes in grades pe-80 & pe-100 for water gas applications in sizes 20 mm to 250 mm (outer diameter) in all pressure ratings. traditionally these pipes are identified by its color for different uses like blue for water, orange for petrol, and yellow for gas line.
specifications : bhagwati plastic & pipe industries manufactures mdpe pipes which confirms to national and international standards as iso:4437, iso:4427, is:14885-2001, bs-7281, din-8074/75. ambika pipes can also be tailor made to meet the specific requirement of individual gas authorities or customers.
salient features :
Characteristics | Units | Requirements | Test Parameters | Test Methods |
---|---|---|---|---|
Conventional Density | kg/m³ | >930 (base polymer) | 230 C | ISO-1183, ISO-1872/1 |
Melt Flow rate | G/10 min. | 940 - 958 | 1900 C / 5kg | ISO-4440/1, IS-2530:1963 |
Thermal Stability | Min. | >20 | 2000 C | ISO/TR-10837 |
Hydrostatic Strength | h | Failure time>=100h | PE-80-9.0 MPa - 200C | ISO-1167 |
- | Failure time>=165h | PE-80-4.6 MPa - 800C | - | |
- | Failure time>=1000h | PE-80-4.0 MPa - 800C | - | |
Elongation at Break | % | >=350 | ISO-6259/3 |
Outer Dia.mm | SDR 17.6 | SDR 13.6 | SDR 11.0 | SDR 9.0 |
---|---|---|---|---|
16 | 2.3 | 2.3 | 3.0 | 3.0 |
20 | 2.3 | 2.3 | 3.0 | 3.0 |
25 | 2.3 | 2.3 | 3.0 | 3.0 |
32 | 2.3 | 2.3 | 3.0 | 3.6 |
40 | 2.3 | 3.0 | 3.7 | 4.5 |
50 | 2.9 | 3.7 | 4.6 | 5.6 |
63 | 3.6 | 4.7 | 5.8 | 7.1 |
75 | 4.3 | 5.5 | 6.8 | 8.4 |
90 | 5.2 | 6.6 | 8.2 | 10.1 |
110 | 6.3 | 8.1 | 10.0 | 12.3 |