• Latest design concepts & manufacturing processes.
• Unique techno modular construction with CRCA sheet steel.
• Fully compartmentalised.
• Suitable for indoor installations.
• Fixed Type – available in single / double front execution.
• Draw Out Type –  available in single front / double front execution.
• PU Foam gasket – can  withstand temperatures from-40ºC to +120ºC.
• 7-10 Tank spray based treatment – unique in the industry.
• Powder Coating with RAL7032 (default) or other user specified structure finish for enclosures.
• RAL 2000 finish or galvanised mounting plate options available.
• IP: 54 & IP: 55 protection offered as per IS: 13947.
• Up-to 4000A, 50kA horizontal bur bars with E91E grade Aluminium / Copper bus bars.
• Aluminium E91E grade vertical bus bars / higher ratings with electrolytic grade copper bus bars.
• Short Circuit withstand capability – busbar system suitable for 50kA for 1 sec. & 105kA peak.

Power Control Centre (PCC) is used for distribution and control of various power source used in industry. Normally PCC is installed near power source hence fault level is high. Busbar system in Power Control Centres are designed to suit the fault level as well as temperature rise to 40°c above ambient. Ample space is provided for cable termination. Various protections like short circuit, overload, earth fault, under voltage etc are provided to protect source and equipment.
Rating up to 6300 Amp, IP-42 & IP-54, as per IEC61439-12009, IS:8623

MCC PANEL 
A motor control centre (MCC) is an assembly of one or more enclosed sections having a common power bus and principally containing motor control units. Motor control centres are in modern practice a factory assembly of several motor starters. A motor control centre can include variable frequency drives, programmable controllers, and metering and may also be the electrical service entrance for the building.

AMF PAEL 
Auto Main Failure Panels, also known as AMF panels, are used to automatically changeover from mains electricity supply to stand-by generator on failure of the mains supply. When the mains supply is restored, the system automatically changes back and stops the Generator. The stand-by generator will be eventually shut down after a short cooling down period.

we customised these panels (both automatic and manual modes) to meet client-specific requirements.

APFC PANEL 
APFC or Automatic Power Factor Control Panels are mainly used for the improvement of Power Factor. Power Factor can be explained as ratio of active power to apparent power and it is a key factor in measuring electrical consumption. Use of these control panels becomes indispensable in those industries where electrical installations are meant to supply to large electrical load.
Range up to 1600 KVAR, 230 - 525 Volts, IP-52, Switching - Contactor / Thyristor,

DG Synchronising Panel 
We are actively involve in manufacturing of high performance DG Synchronisation Panel which comes complete with Controlling & Protection Relays capable of synchronising of more than one DG sets / with Mains & DG and with necessary protections. The offered product is precisely designed and manufactured by utilising optimum quality raw material and best technology.

VFD PANEL 
A Variable Frequency Drive (VFD) is a type of motor controller that drives an electric motor by varying the frequency and voltage supplied to the electric motor. Other names for a VFD are variable speed drive, adjustable speed drive, adjustable frequency drive, AC drive, micro drive, and inverter.

PLC PANEL 
Programmable logic controller (PLC) control panels areknown as PLC Automation Panel are one of the most important and efficient kinds of control panels. Which are generally used in variety of electronic and electrical circuit fittings. PLC Control Panels are highly capable of giving higher output at less power consumption. Integrated with solid PLC logic and flawless PLC hardware programming. We are engaged in designing and manufacturing of PLC & Automation Panels that that is widely appreciated for longer service life and high efficiency. All these panels are hard wired; PLC based and electrically controlled and are used for various machines.

• Latest design concepts & manufacturing processes.
• Unique techno modular construction with CRCA sheet steel.
• Fully compartmentalised.
• Suitable for indoor installations.
• Fixed Type – available in single / double front execution.
• Draw Out Type –  available in single front / double front execution.
• PU Foam gasket – can  withstand temperatures from-40ºC to +120ºC.
• 7-10 Tank spray based treatment – unique in the industry.
• Powder Coating with RAL7032 (default) or other user specified structure finish for enclosures.
• RAL 2000 finish or galvanised mounting plate options available.
• IP: 54 & IP: 55 protection offered as per IS: 13947.
• Up-to 4000A, 50kA horizontal bur bars with E91E grade Aluminium / Copper bus bars.
• Aluminium E91E grade vertical bus bars / higher ratings with electrolytic grade copper bus bars.
• Short Circuit withstand capability – busbar system suitable for 50kA for 1 sec. & 105kA peak.

Power Control Centre (PCC) is used for distribution and control of various power source used in industry. Normally PCC is installed near power source hence fault level is high. Busbar system in Power Control Centres are designed to suit the fault level as well as temperature rise to 40°c above ambient. Ample space is provided for cable termination. Various protections like short circuit, overload, earth fault, under voltage etc are provided to protect source and equipment.
Rating up to 6300 Amp, IP-42 & IP-54, as per IEC61439-12009, IS:8623

MCC PANEL 
A motor control centre (MCC) is an assembly of one or more enclosed sections having a common power bus and principally containing motor control units. Motor control centres are in modern practice a factory assembly of several motor starters. A motor control centre can include variable frequency drives, programmable controllers, and metering and may also be the electrical service entrance for the building.

AMF PAEL 
Auto Main Failure Panels, also known as AMF panels, are used to automatically changeover from mains electricity supply to stand-by generator on failure of the mains supply. When the mains supply is restored, the system automatically changes back and stops the Generator. The stand-by generator will be eventually shut down after a short cooling down period.

we customised these panels (both automatic and manual modes) to meet client-specific requirements.

APFC PANEL 
APFC or Automatic Power Factor Control Panels are mainly used for the improvement of Power Factor. Power Factor can be explained as ratio of active power to apparent power and it is a key factor in measuring electrical consumption. Use of these control panels becomes indispensable in those industries where electrical installations are meant to supply to large electrical load.
Range up to 1600 KVAR, 230 - 525 Volts, IP-52, Switching - Contactor / Thyristor,

DG Synchronising Panel 
We are actively involve in manufacturing of high performance DG Synchronisation Panel which comes complete with Controlling & Protection Relays capable of synchronising of more than one DG sets / with Mains & DG and with necessary protections. The offered product is precisely designed and manufactured by utilising optimum quality raw material and best technology.

VFD PANEL 
A Variable Frequency Drive (VFD) is a type of motor controller that drives an electric motor by varying the frequency and voltage supplied to the electric motor. Other names for a VFD are variable speed drive, adjustable speed drive, adjustable frequency drive, AC drive, micro drive, and inverter.

PLC PANEL 
Programmable logic controller (PLC) control panels areknown as PLC Automation Panel are one of the most important and efficient kinds of control panels. Which are generally used in variety of electronic and electrical circuit fittings. PLC Control Panels are highly capable of giving higher output at less power consumption. Integrated with solid PLC logic and flawless PLC hardware programming. We are engaged in designing and manufacturing of PLC & Automation Panels that that is widely appreciated for longer service life and high efficiency. All these panels are hard wired; PLC based and electrically controlled and are used for various machines.