Listing ID #1157621
Company Information
Ask for more detail from the seller
Contact Supplier
Available with us is Low Watt Density Cartridge Heaters that are manufactured especially for heating applications that don̢۪t require high watt densities. Suitable to be used in any assembly equipment of machine, these Low Watt Density Cartridge Heaters are high on demand in the market. These heaters comprise of helically wound resistant coil formulated from nickel-chrome wire, properly stretched & strung through holes in a round ceramic insulator. The entire element assembly is fitted into a Chrome Nickel Steel sheath. This alloy provides the best combination of physical strength and resistance to heat oxidation up to 450oc. The longer operating heater life is also because of the high purity magnesium oxide filled in remaining space inside the insulator.
| Outer Sheath Material | Chrome Nickel Steel, roll crimped end disc washer of same material Maximum operating temperature 300oC |
|---|---|
| Heating Conductor | NiCr 80:20 |
| Power | ± 10% |
| Voltage | 12 to 440 volts |
| Leakage Current | 0.5 mA |
| High Voltage | 800 V |
| Surface Loading | upto 30 watts/in2 |
| Lead Orientation | Crimed on leads : PTFE/ Fibreglass Flexible leads crimed on solid pin emerging from the heater Fixed in leads : Flexible Fibre Glass or PTFE leads emerging from within the heater |
| Nominal Diameter | 3/8" | 1/2" | 5/8" | 3/4" | 10 mm | 12.5 mm | 16 mm | 20 mm |
|---|---|---|---|---|---|---|---|---|
| Minimum Diameter | .370" | .496" | .620" | .745" | 9.90 mm | 12.40 mm | 15.90 mm | 19.85 mm |
| Maximum Diameter | .375" | 0.50" | .624" | .750" | 10.0 mm | 12.50 mm | 16.00 mm | 20.00 mm |
| Minimum Length | 2" | 2" | 3" | 4" | 50 mm | 50 mm | 75 mm | 100 mm |
| Maximum Length | 20" | 20" | 30" | 40" | 500 mm | 750 mm | 750 mm | 1000 mm |
| Lead wires in mm2 | .50 | 1 | 1.5 | 2.5 | .50 | 1 | 1.5 | 2.5 |
| Maximum Amperes | 4 | 8 | 12 | 18 | 4 | 8 | 12 | 18 |
Connect with us
For Buyer 
For Seller 
Help 
