Listing ID #5923612
Company Information
Ask for more detail from the seller
Contact SupplierDimensions of Loose / Lap Joint Flanges
NPS 1/2 - ID = 22.9 - r = 3Class | 150 | 300 | 400 | 600 | 900 | 1500 | 2500 |
Diameter - A | 30 | 38 | 38 | 38 | 38 | 38 | 43 |
Diameter - D | 90 | 95 | 95 | 95 | 120 | 120 | 135 |
Thickness - B | 11.2 | 14.3 | 14.3 | 14.3 | 22.3 | 22.3 | 30.2 |
Diameter - G | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 |
Diameter - K | 60.3 | 66.7 | 66.7 | 66.7 | 82.6 | 82.6 | 88.9 |
Height - H | 16 | 22 | 22 | 22 | 32 | 32 | 40 |
Bolt Holes | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
Diameter - L | 15.9 | 15.9 | 15.9 | 15.9 | 22.2 | 22.2 | 22.2 |
Stud Bolts Diameter x Length | |||||||
Diameter (in) | 1/2 | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 | 3/4 |
Length (mm) | 55 | 65 | 75 | 75 | 110 | 110 | 120 |
NPS | 1/2 | 3/4 | 1 | 1¼ | 1½ | 2 | 2½ | 3 | 3½ | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 24 |
Dimensional Tolerances of Lap Joint Flanges ASME B16.5
Outside Diameter ≤ 24 = 1.6 mm | > 24 = ± 3.2 mm |
Inside Diameter not applicable |
Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm 6.35 mm Raised Face, Tongue & Groove / Male-Female = ± 0.4 mm |
Outside Diameter of Hub ≤ 12 = + 2.4 mm / - 1.6 mm | ≥ 14 = ± 3.2 mm |
Diameter of Counterbore not applicable |
Drilling Bolt Circle = 1.6 mm | Bolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle with Respect to Facing ≤ 2½ = 0.8 mm max. | ≥ 3 = 1.6 mm max. |
Thickness ≤ 18 = + 3.2 mm / - 0 | ≥ 20 = + 4.8 mm / - 0 |
Length thru Hub ≤ 18 = + 3.2 mm / - 0.8 mm | ≥ 20 = + 4.8 mm / - 1.6 mm |