Listing ID #4271195
Company Information
Ask for more detail from the seller
Contact SupplierDubond’s DU LEVEL is a high-performance levelling of substrates from 1 to 10 mm thickness, with normal setting prolonged workability, manufactured by Dubond Products (India) Pvt. Ltd, suitable for subsequent laying of tiles after 12-24 0 hours and for laying of natural stone, parquet and resilient materials 3-5 days after application, at +23 C 50% R.H. Apply using a smooth spreader on the previously prepared, clean and dimensionally stable substrate and finish with a rigid float.
Areas of Application
Features & Benefits
Usage
Levelling of irregular substrates with normal setting and compensated shrinkage. Thickness upto 10 mm.
Compatible Adhesives
Mineral adhesives with SAS technology, single and two-component organic mineral adhesives. Reactive Epoxy and polyurethane, single and two-component cement based adhesives, dispersed in water and in solvent solutions.
Covering Materials
Substrates
Preparation of substrates
Substrates must be stable, dry, free from any rising damp, without cracks, free from dust, oil, grease and loose, flaky parts. On substrates which are compact but very absorbent, apply Hydro Prime, water based surface insulations, in order to reduce and regulate the level of absorption. In the case of absorbent substrates with weak consistency, apply in double coats without dilution of water.
Application
Apply Dubond DU Level With a smoth Spread. The high lvel of thixotrophy of the mixture allows for high fininjshing thickness with just one coating .It is generally advisable to apply an initial fine layer, pressing the products down to obtain maximum adhesion to the subsequent layers. The apprearance of the finish will vary depending on wheather a smooth steel spreader or a sponge spreader has for application. For subsequent laying of creamic tiles it is always advisable to obtaion a roughened, porous surface.
Preparation
Preparation Dubond DU Level in a clean container by pouring in 3/4 of the water required. Gradually add DU Level to the water, mixing the paste with a low-rev (400/min) helicoidal agitator. Add water until a homogeneous, lump-free mortar is obtained. The amount of water to be added indicated on the packaging, is an approximate guide.
Preparation
Health & Safety Precautions
Adhesion to concrete after 28 days | > 1 MPa | EN 13892-8 |
Resistance to | ||
Compressive strength after 28 days | > 16 MPa | EN 13892-2 |
Flexural strength after 28 days | > 16 MPa | EN 13892-2 |
Abrasion resistance after 28 days | 2 >< 250 mm | EN 13892-2 |
Hardness after 28 days | >95 MPa | Brinell Method |