Listing ID #4123123
Company Information
Ask for more detail from the seller
Contact SupplierNOVIUS LED FLOOD Lights are used in areas where extreme brightness is desired, these emit strong beams of light. This light gets distributed evenly, leaving no dark areas. They also consume significantly lower power for the same high brightness and output, especially cost-effective in multiple arrays of power sources.
Applications:
Features:
Details | NL-FL-1-006 | NL-FL-1-010 | NL-FL-1-020 | NL-FL-1-030 |
---|---|---|---|---|
Power | 6W | 10W | 20W | 30W |
Input Voltage | 90-300V AC,Frq 50 HZ,above 415 V output voltage cut off protection. | |||
Power Factor | More than 0.95 | |||
Colour Temperature | 5500K to 6500K | |||
CRI | More than 85 | |||
THD | Below 10% | |||
Beam Angle | 150-170 deg | |||
Led Luminous Output | 130 ~ 160LM/W | |||
Luminaries Efficiency | Above 85% | |||
Luminaries Lumens O/P | 720 | 1200 | 2400 | 3600 |
Finish Reflector | Anodized | |||
Ingress Protection | Up to IP 67 | |||
Operating Temperature | (-30 deg to 60 deg centigrade) | |||
LED Driver | Constant Voltage and Current | |||
Safety Standard | As per IS Standard, LM 80 | |||
Surge protect | up to 4kva | |||
Housing | High pressure aluminium die casting with powder coated body, toughened glass cover, silicon gaskets, reflector, with lens/without lens. |
|||
Driver Protection | Short Circuit, Over Load, Over Voltage and Over Heat Protection |
Details | NL-FL-1-040 | NL-FL-1-060 | NL-FL-1-120 | NL-FL-1-150 | NL-FL-1-200 |
---|---|---|---|---|---|
Power | 40W | 60W | 120W | 150W | 200W |
Input Voltage | 90-300V AC,Frq 50 HZ | ||||
Power Factor | More than 0.95 | ||||
Colour Temperature | 3000K to 6500K | ||||
CRI | More than 85 | ||||
THD | Below 10% | ||||
Beam Angle | 170 deg | ||||
Led Luminous Output | 130 ~ 160LM/W | ||||
Luminaries Efficiency | Above 85% | ||||
Luminaries Lumens O/P | 3600 | 7200 | 10800 | 13500less than | 13500 |
Finish Reflector | Anodized | ||||
Ingress Protection | Up to IP 67 | ||||
Operating Temperature | (-30 deg to 60 deg centigrade) | ||||
LED Driver | Constant Voltage and Current | ||||
Safety Standard | As per IS Standard, LM 80 | ||||
Surge protect | up to 4kva | ||||
Housing | High pressure aluminium die casting with powder coated body, toughened glass cover, silicon gaskets, reflector, with lens/without lens. |
||||
Driver Protection | Short Circuit, Over Load, Over Voltage and Over Heat Protection |