Listing ID #6166700
Company Information
Ask for more detail from the seller
Contact SupplierChemical Requirements | Grade I | Grade II | Grade III | ||||
Copper | 56.0 - 59.0% | 60.0 - 63.0% | 60.0 - 63.0% | ||||
Lead | 2.0 to 3.50% | 2.50 - 3.70% | 0.50 - 1.50% | ||||
Iron | 0.35% max | 0.35% max | 0.20% max | ||||
Total Imp. Excl. Iron | 0.70% max | 0.50% max | 0.50% max | ||||
Zinc | Remainder | Remainder | Remainder | ||||
Physical Properties | Grade I | Grade II | Grade III | ||||
Condition | Size | T.S. MPA | EL% Min | T.S. MPA | EL% Min | T.S. MPA | EL% Min |
Annealed (O) | 6-25 25-50 50 above |
345 315 285 |
12 17 22 |
355 305 275 |
15 20 25 |
315 285 255 |
22 27 32 |
Half-Hard (HB) | 6-12 12-25 25-50 50 above |
405 395 355 325 |
4 6 12 17 |
395 385 345 315 |
7 10 15 20 |
355 345 305 285 |
8 12 22 27 |
Hard (HD) | 6-12 12-25 |
550 485 |
- 4 |
550 485 |
- 4 |
460 400 |
- 4 |
Fabrication Properties | Grade I | Grade II | Grade III | ||||
Capacity for being | |||||||
Cold worked | Poor | Poor | Poor | ||||
Hot formed | Fair | Fair | Fair | ||||
Machinability Rating | 100% | 90% | 90% | ||||
Suitability for soldering | Excellent | Excellent | Excellent | ||||
Suitability for Brazing | Good | Good | Good | ||||
Uses | |||||||
Precision Components, Hardware, Hinges, Lock Bodies, Screws, Nuts & Bolts | |||||||
Gr II : Gear, Pinions, Precision, Automobile, Electronic Parts | |||||||
Gr III : Precision Components Machining with Riveting Operation |