Larson Cement Base Wall Putty

Larson Cement Base Wall Putty that we manufacture and supply is extensively in demand amongst buyers. Larson Cement Base Wall Putty that we offer is a white colored cement based product with redispersible polymer and functional additives. It is used on interior and exterior rough plaster to give them a smooth finish. We make available our Larson Cement Base Wall Putty in safe packaging of different quantities such as 1 kg, 5 kg, 20 kg, and 40 kg.

For Under Coats : Larson Paints Larson Wall Putty is a white cement based product with redispersible polymer and functional additives for application on interior and exterior rough plasters to give a smooth finish.
Larson Paints :
Product Benefits :

• Provide smooth and uniform finish to rough plasters.
• Good Workability.
• Does not require curing with water.
• Good water resistance.
• Good Tensile Adhesion Strength, Chromium Compressive Strength and Flexural Strength.
• Controlled water vapors permeability.
• Excellent abrasion resistance.
• Resists growth of algae and fungi on wall.
• Good inter coat adhesion to emulsion paint.

Product Feature :

• Available Packs : 1 , 5 , 20 , 40 in kg.
• Shelf life : 1 years from date of manufacture in original tightly Sealed sacks away from direct sunlight and excessive heat.
• Coverage : On Normaly Masonry Surface After Brushing

Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity.
How to Apply : Pre Painting Steps
Plaster : New masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonry surfaces.

• Step 1 : Sanding
• Step 2 :  Pre Wet The Surface
• Step 3 : First Coat Larson Wall Putty Knife / Trowel
• Step 4 : First Coat Larson Wall Putty Knife / Trowel
• Step 5 : Primer And Emulsion Coat