After welding of rail joint by Alumino Thermit the extra weld metal over rail head (top & sides) used to be chipped off manually with the use of a chisel and hammer which still in red hot condition. This manual operation had many disadvantages like hot metal flying, Ununiformity in trimming and it requires long blocks. To eliminate these short comings and faster operation “LAKSHMI MEERUT” has developed a small portable machine named as “Double Action Weld Trimmer”. This small machine required only 2 persons as itis fitted with a powerful hand pump for trimming operation and is also light in weight. The mono rail wheel assembly helps the machine to get carried away from one place to another at different sites in no time. The machine has efficiency to trim the welded joint within 3 minutes only.

After welding of rail joint by Alumino Thermit the extra weld metal over rail head (top & sides) used to be chipped off manually with the use of a chisel and hammer which still in red hot condition. This manual operation had many disadvantages like hot metal flying, Ununiformity in trimming and it requires long blocks. To eliminate these short comings and faster operation “LAKSHMI MEERUT” has developed a small portable machine named as “Double Action Weld Trimmer”. This small machine required only 2 persons as itis fitted with a powerful hand pump for trimming operation and is also light in weight. The mono rail wheel assembly helps the machine to get carried away from one place to another at different sites in no time. The machine has efficiency to trim the welded joint within 3 minutes only.