Kabu Bond 20 Water Based Polymer Emulsion

Listing ID #7473950

kabu bond is an acylic co-polymer emulsion, supplied as a ready to use bonding agent in liquid consistency. it is a versatile product and can be used as a cement modifier for repair of spalled concrete – slabs, balconies, beams, columns, floors & waterproofing of toilets, bathrooms and terraces. kabu bond plays major role in facade coating system . it forms a dry water repellent zone beneath the coating consolidate the substrate and enhance bonding of the coating . it is gas permeable, durable, protects paints & plasters against harmful influences form within the masonry .

areas of application
• waterproofing membrane : roof terraces, sunken portion of toilets & bathrooms, chhajas, balcony, etc.
• concrete repairs : spalled concrete of slabs, chhajas, beams, columns, parapet, floor, etc.
• waterproofing &/or bonding primer : walls & slabs

method of application
clean the surface with wire brush, scrubber or air blower to remove hidden dirt, loose particles, laitance & dust. de-grease the surface by using suitable solvents, if needed.
•bonding primer – to be used as a clear bonding primer by diluting 1:5 with water. apply on the walls before painting or during putty rendering.
•waterproofing primer – for priming of concrete substrate, the surface should be thoroughly saturated with aquasill-99 solution (dilution ratio – 1 part locksil : 20 parts potable water : 2 parts of kabu bond).
•waterproofing membrane – for a waterproofing coating mix 1 part kabu bond with 1 part of cement & 1 part of 100 mesh sand.
•add water for brush ability.
•brush apply the mix in span of 4-6 hours on the prepared concrete substrate. it is recommended to saturate the surface with locksil solution prior to this application.
•overlay the coating with a protective screed to the desired slope and thickness.
•coverage : 4-5 m² for a 0.2 mm (200 microns) coat.
•repair mortar & renders, floor screed & pcc
•prepare the mortar in the following proportion : cement 50 kg + washed sand 75 kg + 6 mm down size aggregates 75 kg + kabubond6-7.5litres+water 10 litres
•for pcc & plaster work : kabu bond 100 ml per bag cement (conforms to is 2645 – 2003)