JETEX ABC-50 CLEANER is a multipurpose, non-abrasive, aqueous, biodegradable, cleaner / degreaser which can be further diluted with water to meet various cleaning applications.
It aggressively attacks and removes grease, oil, dirt, sludge and other light contaminants and allows to be rinsed off with water.
It does not contain any ozone depleting chemicals or chlorinated solvents and equals performance of solvent-based cleaners.
Applications
Suitable for mechanical components washing and degreasing applications.
Benefits

• Removes oil, grease, dirt & sludge deposits
• Biodegradable & leaves no residue
• Multipurpose foaming formula
• Nonflammable & non-abrasive
• Equals performance of solvent based degreasers

Dilution levels will vary subject to the type of surface, contaminant and contamination level of the surface being cleaned. Start at higher concentrations of JETEX ABC-50 CLEANER in water and work up to lower concentrations till satisfactory performance and cleaning is obtained.
Directions for Use
Dilute the product by adding water to it. Stir mechanically with a stirrer if required. Apply product by brush, swab or by dipping components into the cleaner solution. Allow time to penetrate contaminants and then rinse off with water. For heavily soiled parts, use a wire brush or an abrasive to remove excesses. Always clean the surface thoroughly with water to remove any residues left behind and never allow to dry on any surface. Test for compatibility on soft metals and plastic surfaces by checking on a small area.
General
Use in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).
Disposal
All used and unused product should be disposed of in accordance with state regulations.
Handling
Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.
Limited Warranty
The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

JETEX ABC-50 CLEANER is a multipurpose, non-abrasive, aqueous, biodegradable, cleaner / degreaser which can be further diluted with water to meet various cleaning applications.
It aggressively attacks and removes grease, oil, dirt, sludge and other light contaminants and allows to be rinsed off with water.
It does not contain any ozone depleting chemicals or chlorinated solvents and equals performance of solvent-based cleaners.
Applications
Suitable for mechanical components washing and degreasing applications.
Benefits

• Removes oil, grease, dirt & sludge deposits
• Biodegradable & leaves no residue
• Multipurpose foaming formula
• Nonflammable & non-abrasive
• Equals performance of solvent based degreasers

Dilution levels will vary subject to the type of surface, contaminant and contamination level of the surface being cleaned. Start at higher concentrations of JETEX ABC-50 CLEANER in water and work up to lower concentrations till satisfactory performance and cleaning is obtained.
Directions for Use
Dilute the product by adding water to it. Stir mechanically with a stirrer if required. Apply product by brush, swab or by dipping components into the cleaner solution. Allow time to penetrate contaminants and then rinse off with water. For heavily soiled parts, use a wire brush or an abrasive to remove excesses. Always clean the surface thoroughly with water to remove any residues left behind and never allow to dry on any surface. Test for compatibility on soft metals and plastic surfaces by checking on a small area.
General
Use in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).
Disposal
All used and unused product should be disposed of in accordance with state regulations.
Handling
Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.
Limited Warranty
The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.