Inverter,Charger with 20amps,30amps

Listing ID #209943

PHINT850
Highlights:
• 12V DC input
• 850 watts continuous, 1700 watts short period (upto 5 sec.) peak power support
• User selectable 20 Amp. 2 stage Constant Current type Battery Charger
• User selectable 1/2 cycle (10 msec.) or 1 cycle (20 msec.) transfer time
• User selectable parameters
• Reliability enhanced large-transformer design with protected DC terminals
________________________________________
Package Includes:
• PHINT850 Substitute Power Source
• Instruction manual with warranty information
________________________________________
Description:
POWERCELL PHINT850 DC-to-AC Power Inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 850 watts of continuous 230V AC power from any 12V Battery or automotive DC source. PHINT850 delivers up to 200% of the continuous output for up to 5 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When AC is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 2 stage, user selectable 20 Amp charging system. In UPS mode, the SPS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation. Passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Optional SPS-REM wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status information (SPS-REM sold separately). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages.
________________________________________
Features:
• PHINT850 serves as an automotive or stationary DC-to-AC Power Inverter with automatic Line-to-Battery transfer and integrated Battery charger
• Supports 230V AC output from a 230V AC Line power source or 12V DC Battery source
• User selectable 1/2 cycle (10 msec.) or 1 cycle (20 msec.) transfer time between line and battery power supports UPS protection during blackouts and voltage fluctuations
• 850 watts continuous AC output in inverter mode. Supports 200% of the continuous rating for a short period of upto 5 sec.
• 4 level user selectable 20 Amp. rated advanced 2 stage Constant Current type Battery charger with adjustable settings for Wet/Gel Battery types offers fast, reliable battery recharging
• Temperature and DC current dependent auto switching advanced forced air cooling
• Reliability enhanced large-transformer design
• Auto Overload reset function
• Moisture-resistant construction enables vehicular or marine operation in high humidity environments
• Set of nine front panel LED’s display Input AC status, AC/DC operational modes, Overload status, DC voltage level, shutdown status and system fault status
• Set of 8 configuration dipswitches support Wet/Gel Battery charging profiles, Charging Current selection, Input voltage window selection, Overload auto reset enable/inhibit, Buzzer enable/inhibit and Transfer time selection
• Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop
• Front panel remote control connector enables remote off/on switching (requires optional SPS-REM remote accessory)
• Compact in size
________________________________________
TECHNICAL SPECIFICATIONS
Output Power (continuous) 850W
Surge rating for 5 sec. 1700W
Inverter voltage regulation 230 VAC +/-5%
Output frequency 50Hz +/- 0.3%
Output wave form PWM Modified Sine Wave
Efficiency at full load > 87%
AC transfer switch 20 Amp.
________________________________________
CHARGER SPECIFICATIONS
Charge rate† 20A
AC input voltage range 180 - 270V AC
Battery voltage (nominal) 12V DC
Battery voltage range 10.5 – 15V DC
Charge control 2 Stage Constant Current
Battery type settings† Wet Cell (Vented) / Gel Cell (Dry)
________________________________________
GENERAL SPECIFICATIONS
AC Input voltage range 150 – 270V AC
Input Frequency 50Hz +/- 10%
Automatic Transfer Time† 10 msec. to 20 msec.
Operating & Storage temperature 0°C - 45°C
Cooling Temperature and DC current dependent auto switching forced air
Optional Remote Wired SPS-REM (5 mtrs. wire length)
Dimensions (H x W x L) in mm. 180 x 160 x 300
Weight in kg. (approx.) 11
Warranty 24 months (terms and conditions of warranty applicable)
Note: R&D being a continuous process to enhance system performance and reliability, specifications are subjected to change without prior notice
† User selectable