Interlock Bricks

The standard ECO BRICK measures between 220 and 280 mm long X 220mm wide X 115 mm deep, and has beveled champhered edges. BRICK length is controlled by soil and moisture content. 37-38 Bricks of 230 mm length are required per sq. m of 9" walling and 165 - 170 Bricks may be required per cu.m of 9" walling. ECO Conduit BRICK also measures same as Standard ECO BRICK with provision for conduit and horizontal reinforcement applications in Earth Quake resistant construction applications. ECO220 mm Bricks for above ground level superstructures are usually manufactured to an approximate compressive strength of a 4 MPa with a 1:5 cement: soil mix ratio. Adding higher cement ratio makes higher compressive strength Bricks of +7Mpa. Eco Brick walls are stronger than walls made out of cement blocks or ordinary burnt bricks. Eco Brick is made primarily from clay-based sub-soils and water. Only 5%- 10% of the end mix is cement. This is used as a stabilizer and compressed with a massive force of 60-80 Tons. (That is 50 - 100 kg cm2 or 100 - 200 Bars). This process, which is a fully automated mechanical one, creates an extremely high quality and solid product. The strength of the product is further fortified by its special interlocking shape, which makes it even more resistant and high in load bearing. Building with Eco Brick is Cost Effective Walls constructed with burnt bricks or cement blocks, contribute approximately 40% to the total construction cost of a building. When building with Eco Brick, you effectively reduce these costs. Its unique interlocking and beveled-edged features leave no requirement for additional plastering. This will significantly bring down the cost of labour, cement, sand and lime. Even in the rare applications that need plastering, Eco Brick reduces the cost of plastering effectively by more than 50%. .