Listing ID #4672454
Company Information
Ask for more detail from the seller
Contact SupplierAditya Pneumatic & Machinery Pvt Ltd, is an independent designer and manufacturer of Industrial Fans and Blowers over the last decades and has many of fans and blower in successful operation in several Application.Our company maintains strict quality procedure in design, manufacturing and testing. The centrifugal fan is the heart of any industrial application system. Company designs and manufactures fans for wide range of pressure, direction of discharge and power to suit customer requirement. Many of the blowers in varying capacities are available in standard specifications. However, blower & fans are manufactured with different impeller configuration as per application.
CONFIGURATION OF IMPELLER BLADES
Based on application APMPL design and manufacture impellers with following blade configuration
• STRAIGHT BLADE
• BACKWARD CURVED
• FORWARD CURVED
With this type of impeller, the curved blade meets at outer diameter of the impeller in a drawn away position opposite to direction of motion. The impeller has a load limiting capacity. The pressure generated by the fan automatically drops down when volume more than design value is drawn from the blower . Accordingly, the overloading of the motor is avoided. Fans will have higher efficiency (80% or more). This fans can be used for low pressure / high volume application. It is typically used for a static pressure upto 20 inch (500 mm) water column
STRAIGHT BLADE IMPELLERWith this type of impeller, the blade is straight. The impeller design is simple. Fan will have 50 – 75% efficiency. This can be used for high pressure / low volume application. It is more suitable for dust laden atmosphere. However, the fan generates more noise, vibration and shows rising power requirement with volume like forward curved impeller
FORWARD CURVED IMPELLERWith this type of impeller, the curved blade meets at outer diameter of the impeller in a drawn in position in direction of motion. The fan has relatively lower efficiency (60 – 70%). The impeller blades are smaller compared to backward curved blade but more in number and with higher curvature. The fan can operate at low speed and is less noisy in operation
LOW PRESSURE FANAPMPL design and manufactures centrifugal fan from 50 to 900 mm WC static pressure. The HP for these fans vary from 2 to 100 HP (1.5 to 75 KW).
HOT AIR FANAPMPL design and manufactures centrifugal fan for handling hot air upto 600 deg C. The casing and impellers are made of stainless steel.
COMBUSTION AIR BLOWERAPMPL design and manufactures centrifugal fan from 26 to 60 inch (650 to 1500 mm) WC static pressure. The HP for these fans vary from 2 to 150 HP (1.5 to 110 KW).
TYPICAL APPLICATIONS
APMPL blower have been in use in the following areas
Aluminum melting & holding
Steel plant
Ferro- Alloys
Sponge Iron plant/Power Plant
Ceramic/Cement/RMC industries
Ammonia recovery plant/Shipbuilding/Heavy Engineering
Biscuit/Tea/Food processing manufacturing