Listing ID #367936
Company Information
Ask for more detail from the seller
Contact SupplierWe are offering impact testing machine.innovative impact testing machine is specifically designed for conducting izod & charpy test. Impact testing machine is suitable for testing raw material specimen as well as finished components.
components & working of impact testing machine
pendulum of the machine is mounted on antifriction bearings
contains two starting positions, the upper one for charpy and the lower one for izod testing
the pendulum on release swings down to break the specimen and the power absorbed in doing so is calculated as the variation between the height of drop before rupture & height of raise after rupture of the test specimen
the output is read from the maximum pointer on the dial scale
offered with
self centering tong
v - notch milling cutter
u - notch milling cutter
caliper gauge for checking v notch for izod & charpy
depth notch gauge including v & u notch, angle & radius
controls of pendulum
the pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for charpy & the lower one for izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read from the maximum pointer position on the dial scale.
(it is read on digital readout in case of electronic machines.)
there are two strikers and one combined support available for lifting in to the pendulum and on to the base of the machine for izod, charpy test, changing from one striker to another is achieved simply by fixing the new striker into it's position.
charpy test :
the charpy test piece rests on alloy support anvils, fitted on the base of the machine rigidly held in position by allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports.
izod test :
the izod test is clamped vertically in izod support fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece and the allen screw enable clamping of the test piece in correct height with the help of izod setting gauge supplied.