I Pack GPS ACCESS DEVICE

Listing ID #4144598

Get Latest Price

SCADA-enabled communications module for the SymphoniePLUS3 data loggerReal-time and statistical data is accessible to wind farm SCADA system via MODBUS TCP Wind resource assessment data is available by email if internet is accessible via wind farm network
15-28V DC (Continuous 100mA, Charging Max 750mA)Power for attached sensors is not included in these values
One (1) built-in 12V Sealed Lead-Acid (SLA) battery with 2200 mA-hr rating12-14V DC (Continuous: 100mA, Max 200mA)
Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer Location All over the world

View More Details

Send Enquiry

Product Details

Symphonie iPack ACCESS

Integrate real-time, one-second meteorological data into your SCADA (Supervisory Control and Data Acquisition) system.

Details

iPackACCESS is a communications module for the SymphoniePLUS3 Data Logger that enables wind farm operators to integrate real-time, one-second meteorological data into their SCADA (Supervisory Control and Data Acquisition) systems.

In addition to real-time data, iPackACCESS calculates statistical data at user-selected intervals. Data are delivered to pre-defined Modbus registers. With no coding required, iPackACCESS offers ease-of-use and data security by limiting access to defined IP addresses.

Data Logger Connection

iPackACCESS attaches to a port located on the back of the SymphoniePLUS3 Data Logger. The iPackACCESS and SymphoniePLUS3 are then secured to a Symphonie shelter box using four screws.

Benifits

Integrate real-time, one-second meteorological data into your wind farm’s SCADA system
Calculate statistical data (average, standard deviation, min, and max) at user-selected intervals (1, 2, 5, 10, 15, 30, and 60 minutes) so it can be directly forwarded to forecasting providers
Access the data on pre-defined registers using Modbus TCP protocol
Ensure the security of your data by limiting access via user-defined IP addresses
Quickly install the unit in the field, no coding required

In The Box

One (1) Symphonie iPackACCESS
One (1) GPS antenna

Note: The iPack voltmeter SCM is now included in SymphoniePLUS3 data logger kits. SymphoniePRO includes built-in monitoring of the 12V power supply and does not require a separate interface module.

Description
Accessory type	SCADA-enabled communications module for the SymphoniePLUS3 data logger
Applications	Real-time and statistical data is accessible to wind farm SCADA system via MODBUS TCP Wind resource assessment data is available by email if internet is accessible via wind farm network
Instrument compatibility	SymphoniePLUS3 data logger
Functions	MODBUS TCP server available over ethernet connection Supports up to 4 simultaneous MODBUS TCP connections Install firmware updates to iPackACCESS remotely Automatic real-time clock setting from internet time server Automatic download of logged data via email if internet is accessible via wind farm network
Data Collection
Software	Configured with Symphonie Data Retriever (SDR)
Data delivery	Real-time, 1-second values of all 15 channels in both raw and scaled format is available from MODBUS TCP server Mean, standard deviation, minimum, and maximum values at user-selected time interval in both raw and scaled format is available from MODBUS TCP server SymphoniePLUS3 10-minute data is available by email if internet is accessible via wind farm network
Configuration
User interface	Status reporting on data logger front panel Configuration via SDR on Windows PC
Configurable parameters	MODBUS secure client list to prevent unauthorized access by limiting the acceptable IP addresses for incoming connections (up to 10 allowable addresses) Network configuration parameters DHCP capable User-selected time interval for statistical data calculation (1, 2, 5, 10, 15, 30, 60 minutes) Similar wind resource assessment configuration parameters to iPackGPS
Connections
Communication ports	Weather-proof Ethernet connector (RJ45) for connection to SCADA system SymphoniePLUS3 to iPackACCESS via DB25 interface GPS antenna connector QMA female
Power requirements
Batteries	One (1) built-in 12V Sealed Lead-Acid (SLA) battery with 2200 mA-hr rating
External power input	12-14V DC (Continuous: 100mA, Max 200mA)
External solar input	15-28V DC (Continuous 100mA, Charging Max 750mA)
Other	Power for attached sensors is not included in these values
Installation
Mounting	iPackACCESS stacks with SymphoniePLUS3 data logger on long logger mounting screws
Accessories	Weather-proof Ethernet cable boot, and GPS antenna included
Physical
Connections	Two (2) screw terminals for solar PV panel or external power supply input Two (2) screw terminals for external battery One (1) screw terminal for earth ground, pre-wired for connection to data logger earth ground stud
Dimensions	165 x 222 x 102 mm (6.5 x 8.75 x 4.0 inches)
Materials
Enclosure	Weather-proof polycarbonate plastic
System requirements
Computer	Windows PC with Symphonie Data Retriever (SDR) required for programming of iPackACCESS settings.
Operating system	Symphonie Data Retriever (SDR) requires Windows 95 or higher
Related hardware	SymphoniePLUS3 Data Logger (Item 5504) iPack Programming Kit (Item 3368) Universal iPack Charger (Item 3615)

Company Details

Wind is one source of energy that is inexhaustible and available for free to all of us.
And at a time when the world is seeking alternative forms and energies, wind power presents itself as a credible
source of energy and fulfilment for the future.
In times when precise and dependable wind power assessment is more important than ever, RK WindMast comes as a fresh new breeze in wind power assessment. Coming from the house of Ramkrishna Iron Works (RKIW) - a specialist organization devoted to designing, manufacturing and supply of integrated environmental wind monitoring systems, RK WindMast promises to introduce ultra-modern technology and powerful wind power assessment tools in India.
RK Wind Mast are certified by reputed institution agencies like IIT BOMBAY, Sardar Patel College of Engineering. The towers are designed and manufactured in accordance with BS EN 61400-12-1 and galvanized as per BS EN ISO 1461
The towers are known to withstand extreme climate conditions. Stringent R&D processes are followed to ensure the stability of the masts as they are tested and certified to perform at peak even at the wind speed of 50m/s. These masts can be installed in the shortest period of time and require only a small piece of land and very small radii to grout guy wire anchor bolts.
With unmatched quality and unbeatable price, RK WindMasts have always maintained numero uno position in wind assessment technology in India. Thanks to its highly trained professions who believe in giving the best every time. RK WindMasts are packed in recycled paper cardboard boxes to enable safe transportation, in the most eco-friendly way.