Company Information
Ask for more detail from the seller
Contact SupplierGleason 116 Spiral Bevel Gear Generator
This new generator offers many advantages: improved quality of product, increased production rates, longer cutter life, easier setup and operation, simplified development of tooth bearing and the use of the Unitool Method.
Complete technical specifications of Spiral Bevel Gear Generator Gleason 116 are mentioned below:
Description:
Machine Type: Hypoid Spiral Bevel Gear Generator
Machine Make: Gleason
Machine Model: 116
Technical Specifications:
Year Of Manufacture | 1997 |
Max Cone Distance (30 Degree Spiral Angle and 300 mm Cutter) | 228 mm |
Max Extreme Ratio | 10:1 |
Max Gear Pitch Diameter (30 Degree Spiral Angle) Ratio 10:1 Ratio 2:1 Ratio 1:1 |
457 mm |
Diametric Pitch (Coarsest) Max Full Depth Max Face Width Number Of Teeth | 12.7 Mod (DP2) |
Diameter Of Taper Hole At Large End | 100 mm |
Taper Per Foot | 39/1600 mm |
Depth Of Taper | 150 mm |
Diameter Of Spindle Nose | 137.5 mm |
Cutter Diameter | 125 mm; 150 mm; 187.5 mm; 225 mm; 300 mm |
Max Offset Above Center | 112.5 mm |
Max Offset Bellow Center | 112.5 mm |
Max Distance From Machine Center To Nose Of Spindle | 337.5 mm |
Min Distance From Machine Center To Nose Of Spindle | 62.5 mm |
Cutter Speeds | 20 to 115 RPM |
Feed (Seconds Per Tooth) | 9 to 80 Seconds |
Voltage | 380 V, 50 Hz |
Feed Motor | 5.5 KW |
Hydraulic Motor | 3 KW |
Coolant Motor | 1.5 KW |