Listing ID #1273920
Company Information
Ask for more detail from the seller
Contact SupplierHypalon Rubber Sheet CSM are characterized by its extreme resistance to attack by oxygen and ozone and also exhibit excellent weathering and ageing resistance. It is also heat resistant and abrasion resistant. They also exhibit very good tensile and elongation properties.
Hypalon Rubber Sheet CSM have a wide working temperature range of -50°C to +150°C. They are resistant to corrosive chemicals as well as offer moderate resistance to petroleum-oils and fluids. Its most important feature is its resistance to most acids, bases and alkalis. It also has an excellent electrical insulation property as well as flame resistance.
Applications :
Product Code | Specific Gravity (gm/cm3) | Hardness (+/- 5° Shore A) |
Tensile Strength (min. Kg/cm2) | Elongation at Break (min. %) | Compression Set at 70°C for 22hrs (%) | Temp. Range (°C) |
---|---|---|---|---|---|---|
CSM 15070S | 1.5 | 70 | 70 | 350 | 40 | -30 to +110 |
CSM 15060S | 1.5 | 60 | 70 | 375 | 40 | -30 to +110 |
CSM 13070P | 1.3 | 70 | 150 | 400 | 35 | -35 to +140 |
CSM 13060P | 1.3 | 60 | 150 | 400 | 35 | -35 to +140 |
CSM 13050P | 1.3 | 50 | 140 | 450 | 35 | -35 to +140 |
CSM CD (Custom) |
1.30 to 1.70 | 50 to 70 | 50 to 150 | 200 to 500 | 30 to 40 | -50 to +150 |
Standard Sizes |
1) 1.2 Mtr. Wide x 10.0 Mtr. Long. 2) 1.0 Mtr. Wide x 2.0 Mtr. Long. |
---|---|
Custom Size | Max. width upto 2400mm, length upto 20M and thickness from 1mm to 100mm available on request. |
Standard Colour | Black (Other colours available on request subject to availability.) |
Surface Finish | 1) SS - Both Side Smooth (Standard) 2) SF - One Side Smooth / Other Side Fabric Finish 3) FF - both Side Fabric Finish |
Manufacturing Tolerance | ±10% on thickness, ±5% on length, ±2% on width. |
Minimum OrderingInformation Required | • Dimension (Length x Width x Thickness) • Application/End Use • Working Temperature in °C • Tensile Strength & Elongation at Break • Hardness • Specific Gravity • Abrasion Resistance • Colour • Surface Finish • Nature of Chemical Used • Total Quantity Required |
---|
The data on this page represent typical values. Since application variables are a major factor in product performance, this information should serve only as a guideline. We assume no obligation or liability for use of this information. Unless we agree otherwise inwriting, we make no warranties, express or implied, and disclaim all implied warranties. We shall not be liable for any special, incidental or consequential damages. We reserve the right to change product design and properties without notice.