Listing ID #5256315
Company Information
Ask for more detail from the seller
Contact SupplierWe are the leading manufacturers of PDTHR-150Trolley
TECHNICAL SPECIFICATION :
Prime Mover | The deck engine through suitable Power Take Off shall power the hydraulic system. |
---|---|
Make | Cummins or any reputed make |
Capacity | 105 hp @ 2200 rpm |
Mast Assembly | Sturdy structural steel channel mast electrically welded with suitable cross members to withstand sudden shock loads. |
Mast overall Length | 6000mm |
Rotary Head travel | 4500mm |
Centralizer opening | 270mm |
Feed System | Feed & Hoist actuation will be provided with Pulley, wire rope & double acting hydraulic cylinder. |
Cylinder size | Ø100xØ63×1525 |
Pull Back | 2800 kgf |
Pull Down | 39Mtr/ Minute |
Hoisting speed | Ø Having adequate travel to handle drill pies and casing pipes up to 3 Mtr. Long. Ø Feed system consists of Hold back arrangement to control limit weight on bit, rapid and slow feed arrangement to suit variable ground condition. |
Rotary Head | Fabricated structural steel body, Spur gear reduction and oil bath lubrication. |
Output speed | 0-120 RPM |
Output Torque | 215 kg-m, Ø The RH unit travels on Mast assembly to absorb sudden shock loads encountered during drilling operation. |
Hydraulics | Ø The entire Equipment is designed to operate at high temperature encountered in the normal weather conditions.Ø Open loop circuit with variable/Fixed displacement piston pumps and proportional valves for feed and rotation. Diverter valves for auxiliary drives. |
Max operating pressure | 180 kg/cm2 |
Hydraulic Tank capacity | 200 Liters. |
Filtration (Nom) – Return line | 10/25 Microns, * Oil cooler will be provided. |
Control Panel | All Necessary control and monitoring valves and gauges are installed at control panel located nearer to drilling point for driller convenience |
Stabilizer | Hydraulically operated double acting cylinder with telescopic box mounting. |
Cylinder bore | 100mm |
Stroke | 610mm |
No. Of Jacks | 4 Nos. |
The above jacks are provided with ‘Reverse Flow restricted’ valves to ensure safe operation. Two rear jacks are operated with two separate valves and two front jacks are operated with a single valve. | - |
Breakout wrench | The drill Rig is equipped with double acting cylinder for drill rod makeup and breakup |
Size | 80x40x300 |
Mud Pump (Screw pump) | Hydraulically operated screw pump will be used for handling clear water, mud and bentonite solutions. |
Flow | 600 lpm |
Pressure | 15 bar |
Air compressor (Suggested) | Air compressor will be mounted on Separate truck. |
Air delivery | 900 cfm |
Pressure | 200 psi |
Make | ELGI |
Air line lubricator | Line oiler is used for DTH hammer lubrication. |
Capacity | 900 cfm-200 psi |
Make | Spinc |
Tank capacity | 10 lts. |