Listing ID #5256353
Company Information
Ask for more detail from the seller
Contact Supplier
The PDTHR-150 drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PDTHR-150 rig’s flexibility means it will be mounted on tractor and air compressor will be mounted on separate trolley or truck (Rig can be mounted on two wheel or four wheel tractor upon customer request).
| DTH Drilling | |
| Hole Diameter | 6” / 152mm (Continuous) |
| Depth | 500 feet / 150 meters |
| Rotary Drilling | |
| Hole Diameter | 8 1/2” / 216mm |
| Depth | 500 feet / 150 meters |
| Drill Rod Length | 10 feet (3.0 meter) |
| Truck | Ashok Leyland Make |
| Engine Capacity | 160hp @ 2400 RPM |
| Prime Mover | Truck Engine using PTO Gear box |
| Application | Soft / Hard Rock (DTH) |
| Unconsolidated / Alluvial (Rotary) | |
| Mast | Sturdy structural channel mast structure electrically welded |
| Feed System | Feed & Hoist using pulley, wire rope and hydraulic cylinder. |
| Max. Pull up force | 7,000kg-f |
| Max. Pull down force | 4,200kg-f |
| Reeving Ratio | 01:02:00 AM |
| Maximum Pull up speed | 30m/min |
| Rotary Head | |
| Spindle Speed | 0 – 100rpm |
| Torque | 280 kg – m |
| Hydraulic System | |
| Maximum Working Pressure | 180 kg/cm2 |
| Capacity | 450 Liters |
| Air Compressor | ELGI– 600cfm @ 200psi. |
| This Compressor is mounted on the same truck of the drill rig. | |
| Mud Pump | |
| Flow Rate | 1000 LPM |
| Pressur | 10kg/cm2 |
| Centrifugal Type hydraulically driven mud pump required for rotary drilling application | |
| Levelling Stabilizers | |
| Cylinder Bore | Ø125mm |
| Stroke | 610 mm |
| Box mounted type hydraulic levelling jacks | |
| The above jacks are provided with “reverse flow restricted valves” to ensure safe operation. | |
| Mast Rising Cylinder | |
| Cylinder Bore | Ø100 mm |
| Stroke | 700 mm |
| The Drill Rig is equipped with a hydraulic cylinder for Raising & Lowering of the Mast Structure. | |
| Breakout Wrench | |
| Cylinder Bore | Ø70mm |
| Stroke | 200mm |
| The drill rig is equipped with hydraulic break out wrench for making and breaking of drill rods. | |
| Water Injection | |
| Maximum Flow | 50 LPM |
| Pump | |
| Maximum pressure | 40 kg/cm2 |
| Airline lubricator | Suitable to 600cfm @ 200psi compressor. |
| Paint | Epoxy & Polyurethane paint |
| Anti- Corrosion to any type of environment epoxy paints to maintain the more life time of the equipment. | |
Nature of Business
Manufacturer / Exporter / Supplier / Retailer
Number of Employees
Above 1000
Year of Establishment
1986
Connect with us
For Buyer 
For Seller 
Help 
