Company Information
Ask for more detail from the seller
Contact Supplieri-Thermotek 2400 Heat Seal & Hot Tack Tester can be used for heat seal test, hot tack test and heat seal strength test, which is applicable for determination of heat seal and hot tack properties as well as heat seal strength of the substrate materials of plastic film, flexible composite film, coated paper or other composite films.
Â
Heat Seal Test | · Heat seal tests of various plastic films, plastic composite films, paper plastic composite films, co-extrusion films, aluminized films, aluminum foils and aluminum plastic composite films |
Hot Tack Test | · Hot tack tests of plastic films, sheeting and composite films such as PE, PP, PET or those composite films for instant noodle, washing powder and other food or drugs, etc. |
Heat Seal Strength | · Heat seal strength tests of various plastic films, plastic composite films, paper plastic composite films, co-extrusion films, aluminized films, aluminum foils and aluminum plastic composite films after heat seal test |
Heat Seal Test | Sealing Temperature | Room temperature~250 °C |
Sealing Pressure | 0.05 MPa~0.7 MPa | |
Dwell Time | ≤99.9s | |
Resolution | ±0.1°C | |
Accuracy | ±2°C | |
Temperature Gradient | ≤20°C | |
Sealing Area | 55mm×10mm | |
Number of Sealing Jaws | 3+1Note1 | |
Hot Tack Test | Sealing Temperature | Room Temperature~250°C |
Resolution | ±0.1°C | |
Accuracy | ±1°C | |
Dwell Time (Heat Seal) | ≤99.9s | |
Dwell Time (Hot Tack) | ≤20s | |
Sealing Pressure | 0.05~0.7MPa | |
Number of Sealing Jaws | 1+1Note2 | |
Capacity Range | 0~50N (Optional) | |
Test Accuracy | 1% FS | |
Resolution | 0.1N | |
Specimen Width | 15 mm or 25 mm or 25.4 mm | |
Heat Seal Strength | Capacity Range | 0~50N (Optional) |
Test Accuracy | 1% FS | |
Resolution | 0.1N | |
Specimen Width | 15 mm or 25 mm or 25.4 mm | |
Speed | 200mm/min, 250mm/min, 300mm/min (Customization is available) | |
Stroke | 78.5 mm | |
Others | Gas Supply | Air (Outside of supply scope) |
Gas Supply Pressure | 0.05~0.7MPa | |
Port Size | Φ6 mm PU Tubing | |
Dimension | 500 mm (L) × 580 mm (W) × 575 mm (H) | |
Power Supply | 220VAC 50Hz / 120VAC 60HzNote3 | |
Net Weight | 50 kg | |
Configurations | Standard | Instrument (Including wireless data interface), Embedded Software, Standard LCD Monitor, Keyboard, Mouse, Calibration Frame, Pedal Switch, Sample Cutter and Valve tubing Set, Printer |
Optional | Strip Sample Cutter, Unheated Sealing Jaw, Air Compressor and Desiccant |