Products / Services
  • Products / Services
  • Companies
  • Buy Leads
Post Buy Requirement

Hot air drier

Listing ID #4604593

  • Aluminium Tray18 SWG 16"× 32"× 1 1/4".
  • Aluminium Tray16 SWG 16"× 32"× 1 1/4"
  • Supply Type Manufacturer, Exporter, Supplier
  • Preferred Buyer Location India only

The large capacity Ovens and tray driers boasts generous size working chamber and the same time offers extremely uniform temperature distribution. These are quite suitable for industrial use like....
View More Details
Send Enquiry

Company Information

  • Member Since 6 Years
  • Nature of Business Retailer

Ask for more detail from the seller

Contact Supplier

Product Details no_img_icon

The large capacity Ovens and tray driers boasts generous size working chamber and the same time offers extremely uniform temperature distribution. These are quite suitable for industrial use like paint baking varnish baking, plastic granules drying, chemical & powder drying, electrode drying, teflon coating, annealing, core hardening, aging or preheating.

Construction:

Heavy angle frame structure, covered with M.S sheet welded joints, glasswool insulation 100 mm thick. Tripple walled construction with mild-steel (or optionally stainless steel inner chamber) full size single or double door and runners for trolley at bottom level.(Trolley at extra cost)Air circulation from side or top motor & blower.

Heating & Controls:

Heating is provided by long life tubular air heaters situated in the side cavities. The heaters are easily replaceable, Working temperature within oven is controlled by microprocessor based DUAL DISPLAY PID Digital temperature indicator cum controller. Main Switch, Heater selector switch, Amps meter, Volt meter, starter for motor, Contactor, indicating lamps are provided in control panel.

Size & Temprature:

Tray driers of various standard sizes and as per the customer’s requirements are available. Bigger sizes and higher temperature on request. Working on 220 Volts AC single phase or 440V AC three phase as per the size of the drier.

The following are the standard sizes of drying Ovens available with working temp. from 50 deg C to 200 deg C. Prices are without tray.

  •  


Chamber Size(cm) Tray Rating
H W D    
90 90 60 12 4.5 KW
90 90 90 18 6.0 KW
120 90 90 24 7.0 KW
180 90 60 36 10.0 KW
180 90 90 48 15.0 KW

Company Details close-icon

Its late founder Mr. Vimal C. Parikh sowed the seed of presently known EIE Instruments way back in 1977. The seed has now grown to a large tree, which gives shelter and meaning of life to Hundreds of people associated with it. The present directors, staff members and all concerned will remain permanently indebted to him for this courage, support and guiding principles.
We started modestly as a marketing organization and later entered the ever-challenging field of manufacturing. The rich, hard-earned experience as a marketing organization and close interaction with the end users, paved the way for a customer driven, customer focused and customer oriented company.
EIE Instruments is a part of Tech-Mech group. The Group has interest in manufacturing, marketing and Calibration of Scientific Instruments and Testing Equipments for various applications. Professional marketing set up, strong commitment to after sales support, over 30 years experience in understanding and meeting our customer's requirements and sustained emphasis on customer satisfaction, has build a loyal base of customers in different segments of industry, Research and Education field through out the country.
Please take account of our following facilities :
Factory, built on large industrial plot of about 3000 sq. Yards, well equipped with latest Plant and machineries,
Quality assurance department and in house Calibration Lab equipped with state of the art tools, gadgets and Instruments to ensure accurate and reliable product,
Dedicated team of trained and experienced service Engineers
Professional Marketing staff
At EIE, we always think and view any point, from the customers` point of view. Be it, Quality of goods, delivery schedules or after sales service support, we always think of customers delight and satisfaction. To ensure this, we have implemented ISO standards at all levels of organization and are strictly governed by it. We are accredited with ISO 9001 certification for our manufacturing, marketing and Calibration activities. However, this is just beginning. We have lot more to offer.
We invite you to witness our manufacturing, Quality assurance and Calibration facilities to know us better and work with greater confidence.
  • Nature of Business Supplier / Retailer
Tell us your Buy Requirement to Get Instant Response
Tell us what you need?

Looking for hot air drier?

Quantity
Seller Contact Details

Find Seller from near by Cities

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice
hot air drier at Best Price in Ahmedabad - ID: 4604593 | EIE Instruments Private Limited
Products / Services
  • Products / Services
  • Companies
  • Buy Leads
Post Buy Requirement

Hot air drier

Listing ID #4604593

  • Aluminium Tray18 SWG 16"× 32"× 1 1/4".
  • Aluminium Tray16 SWG 16"× 32"× 1 1/4"
  • Supply Type Manufacturer, Exporter, Supplier
  • Preferred Buyer Location India only

The large capacity Ovens and tray driers boasts generous size working chamber and the same time offers extremely uniform temperature distribution. These are quite suitable for industrial use like....
View More Details
Send Enquiry

Company Information

  • Member Since 6 Years
  • Nature of Business Retailer

Ask for more detail from the seller

Contact Supplier

Product Details no_img_icon

The large capacity Ovens and tray driers boasts generous size working chamber and the same time offers extremely uniform temperature distribution. These are quite suitable for industrial use like paint baking varnish baking, plastic granules drying, chemical & powder drying, electrode drying, teflon coating, annealing, core hardening, aging or preheating.

Construction:

Heavy angle frame structure, covered with M.S sheet welded joints, glasswool insulation 100 mm thick. Tripple walled construction with mild-steel (or optionally stainless steel inner chamber) full size single or double door and runners for trolley at bottom level.(Trolley at extra cost)Air circulation from side or top motor & blower.

Heating & Controls:

Heating is provided by long life tubular air heaters situated in the side cavities. The heaters are easily replaceable, Working temperature within oven is controlled by microprocessor based DUAL DISPLAY PID Digital temperature indicator cum controller. Main Switch, Heater selector switch, Amps meter, Volt meter, starter for motor, Contactor, indicating lamps are provided in control panel.

Size & Temprature:

Tray driers of various standard sizes and as per the customer’s requirements are available. Bigger sizes and higher temperature on request. Working on 220 Volts AC single phase or 440V AC three phase as per the size of the drier.

The following are the standard sizes of drying Ovens available with working temp. from 50 deg C to 200 deg C. Prices are without tray.

  •  


Chamber Size(cm) Tray Rating
H W D    
90 90 60 12 4.5 KW
90 90 90 18 6.0 KW
120 90 90 24 7.0 KW
180 90 60 36 10.0 KW
180 90 90 48 15.0 KW

Company Details close-icon

Its late founder Mr. Vimal C. Parikh sowed the seed of presently known EIE Instruments way back in 1977. The seed has now grown to a large tree, which gives shelter and meaning of life to Hundreds of people associated with it. The present directors, staff members and all concerned will remain permanently indebted to him for this courage, support and guiding principles.
We started modestly as a marketing organization and later entered the ever-challenging field of manufacturing. The rich, hard-earned experience as a marketing organization and close interaction with the end users, paved the way for a customer driven, customer focused and customer oriented company.
EIE Instruments is a part of Tech-Mech group. The Group has interest in manufacturing, marketing and Calibration of Scientific Instruments and Testing Equipments for various applications. Professional marketing set up, strong commitment to after sales support, over 30 years experience in understanding and meeting our customer's requirements and sustained emphasis on customer satisfaction, has build a loyal base of customers in different segments of industry, Research and Education field through out the country.
Please take account of our following facilities :
Factory, built on large industrial plot of about 3000 sq. Yards, well equipped with latest Plant and machineries,
Quality assurance department and in house Calibration Lab equipped with state of the art tools, gadgets and Instruments to ensure accurate and reliable product,
Dedicated team of trained and experienced service Engineers
Professional Marketing staff
At EIE, we always think and view any point, from the customers` point of view. Be it, Quality of goods, delivery schedules or after sales service support, we always think of customers delight and satisfaction. To ensure this, we have implemented ISO standards at all levels of organization and are strictly governed by it. We are accredited with ISO 9001 certification for our manufacturing, marketing and Calibration activities. However, this is just beginning. We have lot more to offer.
We invite you to witness our manufacturing, Quality assurance and Calibration facilities to know us better and work with greater confidence.
  • Nature of Business Supplier / Retailer
Tell us your Buy Requirement to Get Instant Response
Tell us what you need?

Looking for hot air drier?

Quantity
Seller Contact Details

Find Seller from near by Cities

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice