Located in Tamil Nadu, India, we are actively functioning as a Manufacturer and Supplier of Horizontal Cylindrical Autoclave all over the nation. We are backed by a team of skilled and experienced personnel who makes use of sophisticated machines and latest techniques for their development. Feel completely free to place the order!

Horizontal Cylindrical Autoclave with ISI (BIS 3829) Part I Marking

• Inner Chamber : SS 316
• Steam Jacket : SS 304
• Working pressure : 1.2kg/cm² & 2.1kg/cm²
• Working Temperature : 121^°C / 134^°C
• Door : Single door with Radial locking system
• Mode of control : With a multiport valve / Automatic Optional
• Pre-vacuum and post vacuum : To eliminate air packs and ensure effective sterilization.
• Water protection : In the event of low water the supply to the heaters is  discontinued automatically and visually indicated in the control panel.
• Pressure switch : An automatic pressure switch adjustable type is provided to  set the required pressure.
• Vacuum drying : An  effective  vacuum drying is caused with powerful ejector and vacuum breaker which draws  air from the atmosphere. It is filtered, pre-heated(sterilized) and finally enters the working chamber for effective drying.
• Water Gauge glass : To note down the level of water glass tube with gauge is provided.
• Gasket : Silicon Expansion type

Instrumentation

• Safety Valve
• Vacuum Breaker
• Non Return Valve
• Steam Trap
• Water inlet and Water outlet Valves

Supply Voltage : 440 volts – 3 phase 
Sequence of Automatic operation includes the following :

• Automatic water filling for the steam generator
• Leak test for required time and results with alarm will displayed and data logged.
• Bowie-dik test
• Spore-test results from approved lab  submitted
• Pulsing (vacuuming, purging and pre-heating)_ Optional
• Sterilization with temp and balance time displayed and data logged
• Exhaustion appropriate to liquid, instruments and fabric cycles.
• Drying cycle with vacuum pump. – Optional
•  Final cooling with admission of filtered  air (0.2 Micron)
• Sterilization completes with F.O values Displayed and data’s logged

Optional :

• High Vacuum with vacuum pump
• Fully Automatic Micro processor or PLC based programmable with solenoid valve operation. Suitable for Liquid, Instruments and Fabric cycle
• Data Logging System
• Double Door System
• Pulsing Controller

Located in Tamil Nadu, India, we are actively functioning as a Manufacturer and Supplier of Horizontal Cylindrical Autoclave all over the nation. We are backed by a team of skilled and experienced personnel who makes use of sophisticated machines and latest techniques for their development. Feel completely free to place the order!

Horizontal Cylindrical Autoclave with ISI (BIS 3829) Part I Marking

• Inner Chamber : SS 316
• Steam Jacket : SS 304
• Working pressure : 1.2kg/cm² & 2.1kg/cm²
• Working Temperature : 121^°C / 134^°C
• Door : Single door with Radial locking system
• Mode of control : With a multiport valve / Automatic Optional
• Pre-vacuum and post vacuum : To eliminate air packs and ensure effective sterilization.
• Water protection : In the event of low water the supply to the heaters is  discontinued automatically and visually indicated in the control panel.
• Pressure switch : An automatic pressure switch adjustable type is provided to  set the required pressure.
• Vacuum drying : An  effective  vacuum drying is caused with powerful ejector and vacuum breaker which draws  air from the atmosphere. It is filtered, pre-heated(sterilized) and finally enters the working chamber for effective drying.
• Water Gauge glass : To note down the level of water glass tube with gauge is provided.
• Gasket : Silicon Expansion type

Instrumentation

• Safety Valve
• Vacuum Breaker
• Non Return Valve
• Steam Trap
• Water inlet and Water outlet Valves

Supply Voltage : 440 volts – 3 phase 
Sequence of Automatic operation includes the following :

• Automatic water filling for the steam generator
• Leak test for required time and results with alarm will displayed and data logged.
• Bowie-dik test
• Spore-test results from approved lab  submitted
• Pulsing (vacuuming, purging and pre-heating)_ Optional
• Sterilization with temp and balance time displayed and data logged
• Exhaustion appropriate to liquid, instruments and fabric cycles.
• Drying cycle with vacuum pump. – Optional
•  Final cooling with admission of filtered  air (0.2 Micron)
• Sterilization completes with F.O values Displayed and data’s logged

Optional :

• High Vacuum with vacuum pump
• Fully Automatic Micro processor or PLC based programmable with solenoid valve operation. Suitable for Liquid, Instruments and Fabric cycle
• Data Logging System
• Double Door System
• Pulsing Controller