Products / Services
  • Products / Services
  • Companies
  • Buy Leads
Post Buy Requirement

Horizontal Autoclave

Listing ID #4256271

  • Supply Type Manufacturer, Exporter, Supplier
  • Preferred Buyer Location All over the world

      Contsrtuction The unit has outer chamber, inner chamber, Boiler, Lid and Jacket - all made of AISI 304 grade stainless steel. For controlling sterilization cycle, a three way valve....
View More Details
Send Enquiry

Company Information

  • Member Since 10 Years
  • Nature of Business Retailer

Ask for more detail from the seller

Contact Supplier

Product Details no_img_icon

 
 
 
Contsrtuction The unit has outer chamber, inner chamber, Boiler, Lid and Jacket - all made of AISI 304 grade stainless steel. For controlling sterilization cycle, a three way valve or a multiport valve - made of S.S. is provided. The unit have a very efficient ms radial locking arrangement, fitted on ms ring, duly chrome plated. It is supplied complete with vaccum breaker, water level indicator, steam trap and automatic pressure control switch. The whole unit is mounted on a robust tubular ms stand. Operatable on single / three phase, 220/440 volts, 50Hz A.C. Supply.
 
Mode of Heating Electrically heated by special flange type / immersion type heaters bearing ISI mark, to work on single / three phase, 220/240 volts, 50Hz, A.C. supply.
 
Working Pressure The pressure inside the chamber is variable from 5 psi to 20 psi. But the normal recommended pressure for sterilization process is 1.2 Kgf/cm2 (15 psi).
 
  Working Temperature : 121 deg.C
Working Pressure : 1.26 Kgf/cm2 (15 psi)
Hydro Test Pressure : 2.5 Kgf/cm2 (35 psi)
 
Working Chamber
Size Volume Load (KW)
400 x 600 mm 78 Ltrs 6 KW
500 x 900 mm 135 Ltrs 10 KW
550 x 750 mm 152 Ltrs 9 KW
400 x 1100mm 162 Ltrs 12 KW
500 x 1200mm 185 Ltrs 12 KW
600 x 1200mm 300 Ltrs 18 KW
750 x 1200mm 525 Ltrs 18 KW
 
Optional Accessories
  • Semi Automatic Pressure Control Switch.
  • Automatic Low Water Cut Off Device
  • Mechanical Timer (0-60 Min)
  • Mechanical Timer With Alarm System
  • Solid State Digital Timer (0-120 Mins)
  • Solid State Digital Temperature Indicator.
  • Micro-Processor Based Programmable Timer Controller.
  • Micro-Processor Based Programmable Timer (0-120)
  • Circular Temperature Chart Recorder (24 Hours/Seven Days)
  • Strip Chart Recorder
  • Digital Pressure Transducer Cum Indicator
  • Automatic Pressure And Temperature Mapping System With Validation Soft Ware (Without Pc)
 
Rubber Gaskets Neoprene rubbler or silicon rubber
Size
250 X 450 MM
300 X 500 MM
350 X 550 MM
450 X 600 MM
500 x 1200mm
550 X 750 MM
 
Spare Heaters (In-house custom Developed SS Heaters)
2 KW
3 KW
4 KW


Company Details close-icon

We are at the beginning of an economically sensitive era and C-tech has never been better positioned to meet the needs of the thousands of customers who will join us and benefit from our vast array of testing, measurement and quality control technologies in the coming years. By offering the best value for the investment our customers make, C-tech will deliver state-of-the-art quality products and technologies that meet and exceed our customers requirements in the modern materials testing world.
Ensuring that customers are satisfied every time they interact with C-tech is a goal owned by every C-tech Team member. The C-tech principles set the strategic direction for how we'll continue to keep customers at the forefront of all we do in developing and delivering high technology testing products and solutions that meet and exceed the demanding requirements of our customers,and offering innovative new products that deliver a superior value and price/quality ratio. Many people are familiar with C-tech’s customer-focused business strategy, and the company's success in creating leading value for customers and industries.
We characterize our environment in a statement of corporate philosophy called the 'C-tech Principles' which defines the kind of company we are and aspire to become.C-tech Principles serve as a guide for our actions around the world, and ultimately forms the basis of our 'winning culture.
  • Nature of Business Manufacturer / Exporter / Supplier / Retailer
Tell us your Buy Requirement to Get Instant Response
Tell us what you need?

Looking for Horizontal Autoclave?

Quantity
Seller Contact Details

Find Seller from near by Cities

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice
Horizontal Autoclave at Best Price in Ahmedabad - ID: 4256271 | Ctech Instruments
Products / Services
  • Products / Services
  • Companies
  • Buy Leads
Post Buy Requirement

Horizontal Autoclave

Listing ID #4256271

  • Supply Type Manufacturer, Exporter, Supplier
  • Preferred Buyer Location All over the world

      Contsrtuction The unit has outer chamber, inner chamber, Boiler, Lid and Jacket - all made of AISI 304 grade stainless steel. For controlling sterilization cycle, a three way valve....
View More Details
Send Enquiry

Company Information

  • Member Since 10 Years
  • Nature of Business Retailer

Ask for more detail from the seller

Contact Supplier

Product Details no_img_icon

 
 
 
Contsrtuction The unit has outer chamber, inner chamber, Boiler, Lid and Jacket - all made of AISI 304 grade stainless steel. For controlling sterilization cycle, a three way valve or a multiport valve - made of S.S. is provided. The unit have a very efficient ms radial locking arrangement, fitted on ms ring, duly chrome plated. It is supplied complete with vaccum breaker, water level indicator, steam trap and automatic pressure control switch. The whole unit is mounted on a robust tubular ms stand. Operatable on single / three phase, 220/440 volts, 50Hz A.C. Supply.
 
Mode of Heating Electrically heated by special flange type / immersion type heaters bearing ISI mark, to work on single / three phase, 220/240 volts, 50Hz, A.C. supply.
 
Working Pressure The pressure inside the chamber is variable from 5 psi to 20 psi. But the normal recommended pressure for sterilization process is 1.2 Kgf/cm2 (15 psi).
 
  Working Temperature : 121 deg.C
Working Pressure : 1.26 Kgf/cm2 (15 psi)
Hydro Test Pressure : 2.5 Kgf/cm2 (35 psi)
 
Working Chamber
Size Volume Load (KW)
400 x 600 mm 78 Ltrs 6 KW
500 x 900 mm 135 Ltrs 10 KW
550 x 750 mm 152 Ltrs 9 KW
400 x 1100mm 162 Ltrs 12 KW
500 x 1200mm 185 Ltrs 12 KW
600 x 1200mm 300 Ltrs 18 KW
750 x 1200mm 525 Ltrs 18 KW
 
Optional Accessories
  • Semi Automatic Pressure Control Switch.
  • Automatic Low Water Cut Off Device
  • Mechanical Timer (0-60 Min)
  • Mechanical Timer With Alarm System
  • Solid State Digital Timer (0-120 Mins)
  • Solid State Digital Temperature Indicator.
  • Micro-Processor Based Programmable Timer Controller.
  • Micro-Processor Based Programmable Timer (0-120)
  • Circular Temperature Chart Recorder (24 Hours/Seven Days)
  • Strip Chart Recorder
  • Digital Pressure Transducer Cum Indicator
  • Automatic Pressure And Temperature Mapping System With Validation Soft Ware (Without Pc)
 
Rubber Gaskets Neoprene rubbler or silicon rubber
Size
250 X 450 MM
300 X 500 MM
350 X 550 MM
450 X 600 MM
500 x 1200mm
550 X 750 MM
 
Spare Heaters (In-house custom Developed SS Heaters)
2 KW
3 KW
4 KW


Company Details close-icon

We are at the beginning of an economically sensitive era and C-tech has never been better positioned to meet the needs of the thousands of customers who will join us and benefit from our vast array of testing, measurement and quality control technologies in the coming years. By offering the best value for the investment our customers make, C-tech will deliver state-of-the-art quality products and technologies that meet and exceed our customers requirements in the modern materials testing world.
Ensuring that customers are satisfied every time they interact with C-tech is a goal owned by every C-tech Team member. The C-tech principles set the strategic direction for how we'll continue to keep customers at the forefront of all we do in developing and delivering high technology testing products and solutions that meet and exceed the demanding requirements of our customers,and offering innovative new products that deliver a superior value and price/quality ratio. Many people are familiar with C-tech’s customer-focused business strategy, and the company's success in creating leading value for customers and industries.
We characterize our environment in a statement of corporate philosophy called the 'C-tech Principles' which defines the kind of company we are and aspire to become.C-tech Principles serve as a guide for our actions around the world, and ultimately forms the basis of our 'winning culture.
  • Nature of Business Manufacturer / Exporter / Supplier / Retailer
Tell us your Buy Requirement to Get Instant Response
Tell us what you need?

By clicking Get Quotes Now, I accept the T&C and Privacy Policy.

Looking for Horizontal Autoclave?

Quantity
Seller Contact Details

Find Seller from near by Cities

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice