Company Information
Ask for more detail from the seller
Contact SupplierConstruction | - | Single Core or Multi Core / Pairs |
---|---|---|
Voltage Grade | - | 250VAC, 600VAC & 1000VAC (Rating as per MIL 16878, VDE, DIN, ANSI) |
Conductors | - | Annealed bare and/or tinned copper conductor (up to 120° C) Annealed silver plated copper conductor (up to 200° C) Nickel plated conductors (up to 260° C) |
Fire Barrier | - | Glass mica tape |
Insulation | - | Silicone rubber or Cross linked polyolefin elastomer |
Screening | - | Individual and/or overall with following options - - Aluminum Mylar/Copper Tape with Tinned Copper Drain Wire or - Braided with Bare or Tinned or Nickel Plated or Silver Plated Copper |
Innter Sheath | - | LSOH / ZHFR or equivalent |
Armouring | - | Galvanised Steel wire helical armouring or wire braiding |
Outer Sheath | - | LSOH / ZHFR or equivalent |
Standards | - | BS:5308 or equivalent with fire resistance to BS:6387 category CWZ and IEC:60331 tested for 950°C for 3 hrs. |
Insulation | Temperature Range | Characteristics | |
Varnished Fibre Glass Braid | -72° C to 350° C | High Temperature Resistance | |
FEP | -200° C to 200° C | Good Chemical Resistance Thin wall insulation due to good electrical properties | |
PFA | -200° C to 250° C | Good Chemical Resistance, Thin wall insulation due to good electrical properties, Good flexibility | |
PTFE | -200° C to 260° C | Excellent chemical resistance , High temperature stability | |
Kapton tape | -250° C to 300° C | Very thin wall insulation, High temperature resistance | |
PEEK | -160° C to 250° C | Mechanically very tough High temperature and radiation resistance | |
ETFE | -150° C to 150° C | Mechanically tough | |
Silicone Rubber | -40° C to 200° C | Flexible & abrasion resistance |
Steel | Cables for blast furnace, electric arc furnace, hot & cold rolling mills, steel refining facilities etc. | ||
Communication | High frequency co-axial cables for VHF, UHF and XHF transmission | ||
Marine | Engine proximity wiring for good resistance to high temperatures, fuel oils, chemicals, saline air/water etc. | ||
Petrochemical | Instrumentation & control, temperature sensing, fire warning etc. | ||
Power | In proximity to the turbines, boilers, ash handling etc. |