HIGH PRESSURE COLD WATER JET CLEANING SYSTEM

• Electric Motor 7.5 HP, 1450 RPM, 50 Hz
• Electric Consumption Per Hr. Approx. 5.59 Unit/hr

Pump :

• Triplex reciprocating pump, brass pump head, ceramic pistons, stainless steel valves and by-pass valve to unload the high pressure.
• Mounting SS Trolley (Closed Body)
•  Weight Approx. 70 kgs
• Dimension (L x W x H) 28” x 23” x 18”

Standard Accessories Supplied With the Equipment:

• High Pressure hoses 10 mtrs. Long with screw coupling both ends.
• Spray gun assembly
• Lance with V-Jet.
•  PVC Nylon Breaded water Inlet Hose 5 meters long
• Electric Cable 5 meters long

Other information :

• Type : High Pressure Triplex Plunger Pump
• Required Suction Pressure : Flooded suction with max 2 bar
• Duty Cycle : Intermittent , 2 to 8 hours / day , & 5-10 min stop after every one hour
• Plunger surface finish : High Finish Ceramic ( < 0.25 Ra )
• Crank Shaft : Forged Alloy steel, Hardened and Ground

Customer’s Scope :

• Water utility line with minimum line pressure of 2-3 Bar

Water quality:
Besides the general characteristics of the water according to the requirements for potable water, the following recommendations can be given from practical experience to prevent corrosion and to reduce furring:

• ph-value 7 to 8,5 the water has to be in balance of lime and Carbon dioxide which means it shall not contain self aggressive iron carbon dioxide
• Carbonate hardness 6 to 15° dH
• Chlorid content of < 100 mg/l Cl shall be reached
• Filter accuracy 20 µm
• Temperature 14°C