High Mast Lighting Pole, for Garden, Street

Listing ID #3759584

Features :

•  In house Design facilities (Structural & Foundation) with PLS/Special Software (Validate from IIT-Kharagpur.
•  Available both in three point and two point suspension.
•  Electroplated rope drum, sprocket and torque limiter which do not rust.
•  Rope drum of winch have one left hand and other right hand groove for better alignment of ring.
•  Available both Detachable arm and fixed arm Lantern Ring.
•  Seven tanks and zero discharge galvanizing process with Flux tank heated by superheated steam for better Adhesion of zinc coating.
•  All testing facility available in plant including Spectrometer for chemical analysis.
•  All Trailing cables confirm to IS 9968 (P-1) for safety and durability.
•  All the hardware supplied are stainless steel for better life.
•  Our head frame have stainless steel axle with anti rotation clamp to prevent damage of axle and stainless steel guide roller for smooth rolling of cable and rope.
•  Heavy duty drive chain (1/2 inch pitch) for lifting the ring.
•  We provide safety locking rope for high mast safety.
•  We provide double safety protection of motor (one mechanical and one electrical)
•  Optionally we provide anti thief nut for foundation bolt with specially developed wrench for High mast.
•  Can provide both PVC and HDPE buffer arrangement for Lantern Ring.
•  All winch & Motor tested with proper load before dispatch.
•  Structural Design is checked for all orders before production.
•  Wind Tunnel test from IIT-Kanpur.

Other Details :

•  Material -  Shaft– High tensile sheet/Plate Equivalent to BSEN 10025  -  2004 / IS 2062  -  2011 Gr.E350BR / IS 5986  -  2011 Gr 355, Base Plate- As per IS 2062  -  2011 Gr.E250A,
•  Foundation Bolt- IS 1367  -  1994 / IS 2062  -  2011 Gr.E250A
•  Galvanizing -  As Per IS 4759  -  1996 / IS 2629  -  1985 / BSEN ISO 1461  -  2009
•  Wind Speed -  As per IS 875 (Part-3) - 2015/As per customer requirement
•  Design -  As Per IS 875 Part-3 - 2015, IS 800  -  2007 / IS 6533 - 1989 (P-2) / BS 5649  -  1985 / EN 40, ILE TR-7 - 2000.
•  Welding -  As per IS 10178  -  1995/ IS 9595  -  1996

Design Safety Factor :

•  As per ILE TR 7 - 2000.
•  Motor -  As per IS 325 - 1996 (3PH A.C., 415V, 4/6 Pole, 1HP to 3HP)
•  Winch -  350KGS, 500 KGS, 750 KGS (SGDD/DGDD) & 1500 KGS (DGDD).
•  Wire Rope -  Stainless Steel 6MM, 8MM, AISI 316, 7/19 Construction.
•  Trilling Cable -  As per IS 9968/P-1 - 1988 [2.5sq 5/8core, 4sq 5/8core, EPR Insulated, Sheathed.
•  Wiring Cable -  As per IS 694 - 1990
•  Pulley -  LM 6 with Self- lubricating PB bush.
•  Hardware -  Stainless Steel
•  Feeder Pillar Box -  As per customer requirement
•  Tolerances -  As per BS 5649  -  1978/EN 40, IS 1852 -  1985