Heavy Duty Motor Cleaner Spray, for Industrial

Listing ID #5612648

features of hd 1014 - heavy duty motor cleaner it is a degreasing agent with high dielectric resistance for cleaning electric motors and other equipments. it instantly penetrates and removes dirt, moisture, oil, wax and grease from electrical equipment and machinery to clean and degrease electrical equipment when electrical current exists, this prevents intermittent failure of equipment due to flash-overs or short circuits.   application of hd 1014 - electronic and electrical parts contact cleaner motor cleaner has been designed for the specific cleaning and degreasing of electric motors, generators,switch gears,terminal, air conditioners, fans, transformers and tools. it quickly removes grease, tar, carbon deposits and all dirt characteristic to this kind of equipment   direction of hd 1014 - heavy duty motor cleaner shake well before use until the sound of the ball is audible. clean & degrease surface hold the can at least 10 to 12 cm from the surface you are spraying and keep the can upright during use.protect & mask areas not coated. two light coats is best results better than one heavy coat.coating becomes dry in 20 minutes. make sure the surface is completely dry before using.completed cure takes place in about 24 hours depends upon the humidity. & maintain full pressure on valve while spraying. repeat spraying whenever necessary. when finished spraying, clean the aerosol valve by turning the can upside down and pressing the button until only propellant escapes.   precaution of hd 1014 - heavy duty motor cleaner contains gas under pressure do not punctured ,may explode if heated. extremely flammable prevention : wear eye or face protection. keep away from heat, hot surfaces, sparks, open flames and other ignition sources. no smoking. pressurized container: do not pierce or burn, even after use. do not spray on an open flame or other ignition source. use only outdoors or in a well-ventilated area. avoid breathing vapor. wash hands thoroughly after handling. causes serious eye irritation. may cause drowsiness and dizziness response : if inhaled: remove victim to fresh air and keep at rest in a position comfortable for breathing. call a poison center or physician if you feel unwell. if in eyes: rinse cautiously with water for several minutes. remove contact lenses, if present and easy to do. continue rinsing. if eye irritation persists: get medical attention. dispose of contents and/or container according to federal, state/provincial and local governmental regulations.   storage of hd 1014 - heavy duty motor cleaner store locked up. protect from sunlight. do not expose to temperatures exceeding 50°c/122 °f. store in a well-ventilated place.keep container tightly closed. keep out of reach of children