Heat Shrinkable End Caps

Listing ID #3959099

Get Latest Price

Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer Location All over the world

View More Details

Product Details

This data sheet covers the requirements for heat shrink end caps whose dimension will shrink to a predetermined size up on the application of heat above 125 deg. C. Color of the end caps is black. The end caps are pre-coated on the machine in film form or spiral form, with a hot melt adhesive of translucent, yellowish color.

Typical Applications

End caps are used for protecting the unused cable end from the environmental effects. They also offer insulation on the unused end of electrical cable connected to supply. IKEBANA end caps with film form coating are suitable for pressurized and with spiral form coating for unpressurized telecommunications cables and full range of electrical cables of PVC, XLPE, PILC or rubber type jackets. The application table gives the end cap dimensions and cable diameter range of usage for each model. For pressurized telecom cables, the end caps are fitted with a non return air valve.

Materials

The base material of the end caps is thermally stabilized, cross linked polyolefin. The end cap is coated inside with a polyamide based hot melt adhesive. The raw material is compounded with a package of chemical additives offering protection against oxidation, ozone , UV radiation etc.

Ordering for End Caps Manufactured from Special Materials

End caps can be supplied against specific orders manufactured from semi-conducting or non-tracking high voltage (Red) materials. Non-tracking HV end caps are coated with butyl rubber based mastic, which is water-proof, insulating and non-tracking. Semi-con end caps are coated with semi-conductive mastic or poly-amide based hot melt adhesive or suitable combination of both.

End Cap		End Cap Dimensions		Cable Diameter
Normal	with valve	ID-Ex (mm)	Length-Ex (mm)	min (mm)	max (mm)
IXL 100S	-	10.0/3.0	35.0	4.0	9.0
IXL 100	-	15.0/4.5	45.0	5.0	12.0
IXL 105	IXL 105 V	20.0/6.0	63.0	7.0	17.0
IXL 110	IXL 111	25.0/8.5	70.0	10.0	22.0
IXL 120	IXL 121	40.0/14.5	102.0	17.0	34.0
IXL 130	IXL 131	63.0/24.0	118.0	28.0	55.0
IXL 135	IXL 135 V	75.0/32.0	120.0	37.0	65.0
IXL 140	IXL 141	78.0/38.0	130.0	43.0	70.0
IXL 145	IXL 145 V	106.0/45.0	164.0	50.0	100.0
IXL 150	IXL 151	100.0/57.0	155.0	65.0	90.0
IXL 160	IXL 161	120.0/57.0	155.0	75.0	110.0
IXL 170	IXL 171	145.0/57.0	155.0	80.0	135.0

Company Details

Ikebana Engineering Limited (Ikebana) was founded in Thailand in 1992 by Mr. Sanjeev Nabar, a technologist graduated from IIT, Bombay. Mr. Nabar heads Ikebana as the Managing Director. Since 2009, Ikebana Engineering Ltd. is part of the Knill Gruppe from Austria, an International group present in 16 countries world-wide, active in the field of infrastructure, supplying systems and application for energy and data transmission.
At its fully vertically integrated manufacturing facility equipped with a modern testing laboratory in Ratchaburi, Thailand, Ikebana manufactures heat shrinkable molded shapes used in termination system such as breakouts, sheds, boots, heat shrinkable tubes for medium / low voltage applications and heat shrink end caps for a complete range of cables.