Company Information
Member Since 10 Years
Nature of Business Manufacturer
GST No. 03AADCP3605J1ZQAsk for more detail from the seller
Contact Supplier
Heat Resistant Conveyor Belts are meant to exhibit high resistance towards hot materials with high temperature such as Pellets, Sinter, Cement, Powder, Chemicals and Fertilizers. The cover rubber of these belts are specially designed to provide heat transfer protection to the belt carcass and also improved tensile strength and abrasion resistance property to ensure long life of the belt.
In the HR- As per IS T1 & DIN T category, the conveyor belts are made out of special rubber compound that contains high quality SBR. They help in the transportation of material such as hot coke, clinkers & hot lime stone. Maximum temperature on the belt surface is 100 ⁰C & Maximum temperature of material handled is 125 ⁰C.
In the SHR-T2 – As per IS T2 & DIN T category, special synthetic rubber compound can endure higher temperature for transportation of materials such as hot cement, sintered coke, or soda ash. The Maximum temperature on the belt surface is 125 ⁰C & Maximum temperature of material handled is 150 ⁰C.
In the UHR-T3 – category, special blend of EPDM & synthetic rubber can endure very high temperature for transportation of materials such as sintered coke, or soda ash. The Maximum temperature on the belt surface is 180 ⁰C & Maximum temperature of material handled is 220 ⁰C.
| Heat Resistant | Tensile Strength | Elongation at Break | Maximum Abrasion Loss | Polymer / Rubber | Working Temperature Range | Application |
|---|---|---|---|---|---|---|
| Mpa | % Minimum | MM3 | Degrees Centigrade | |||
| HR-T1 | 12 | 3.5 | 200 | SBR Blend | + 100 Max for Fines + 125 Max for Lumps | For hot materials such as crushed cement, foundry sand, fertilizers, clinker, coke etc. |
| SHR-T2 | 12 | 3.5 | 180 | SBR Blend | + 125 Max for Fines + 150 Max for Lumps | For hot materials upto 150 deg. Centigrade such as crushed cement, foundry sand, fertilizers, clinker, sinter, slack, coke etc. |
| UHR-T3 | 12 | 3.5 | 120 | EPDM | + 180 Max for Fines + 220 Max for Lumps | Very hot & abrasive materials as above upto 220 deg. centigrade |
Connect with us
For Buyer 
For Seller 
Help 
SAS Nagar, Dera Bassi, Punjab 
Send Enquiry