Hdpe Pipes and Fittings

Listing ID #4001329

Get Latest Price

GRADES:PE-63, PE-80 & PE-100
JOINTING METHODS:Fusion / Welding Joints, Flange Joints, Quick Release Coupler Joints, Compression Fitting Joints, Inserted Transition Joints.
PRESSURE CLASS:2.5 Kg/Cm2 to 16 Kg/Cm2
DIMENTION:Wall Thickness PE-63, Wall Thickness PE-80, Wall Thickness PE-100
Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer Location All over the world

View More Details

Send Enquiry

Product Details

HDPE PIPE FITTINGS: Tee, Bend, Pipe End, Reducer, End Cap,Slipon Flange.
STANDARDS: IS-4984, IS-14333, IS-14151, ISO-4427, ISO-4437, DIN-8074
HDPE PIPE SIZES: 16 mm to 710 mm OD.
JOINTING METHODS: Fusion / Welding Joints, Flange Joints, Quick Release Coupler Joints, Compression Fitting Joints, Inserted Transition Joints.
GRADES: PE-63, PE-80 & PE-100
DIMENTION: Wall Thickness PE-63, Wall Thickness PE-80, Wall Thickness PE-100
PRESSURE CLASS: 2.5 Kg/Cm2 to 16 Kg/Cm2
OTHER ACCESSORIES: Irrigation Sprinklers, Dust Suppression Sprinklers, Fog Nozzles, Clamp Saddles & Compression Fittings.

Application of HDPE Pipes.

WATER SUPPLY

Raw/filtered water rising/gravity mains with distribution network.
Demineralized water lines.
Lift irrigation & siphon irrigation.
Cooling/Chilled water circulation lines.
Temporary construction water lines schemes for draught relief and flood relief.
Agriculture applications like farm irrigation under ground or above ground piping network, sprinkler system, drip systems. Suction & delivery for jet pumps, submersible and centrifugal pumps.

CHEMICAL AND EDIBLE TRANSPORT

Acids/ alkalies (diluted or concentrated) like sulphuric acid, phosphoric acid, hydrochloric acid, fluoric acid, aromatic acid, caustic soda conveyance (pH 0 to 14).
Edible oils, juices, pulp, salts, alcohol/.

SLURRY TRANSPORTATION

Hydro transportation of solids like sand slurry, iron/tin ore slurry, iron ore tailing slurry, coal slurry, cement slurry, fly ash and boiler ash as slurry.
Conveyance of Mud/Sand slurry for Dredging Applications.

EFFLUENT COLLECTION AND DISPOSAL SYSTEM

Effluents
Industrial pollution for safe disposal of chemicals in the sea.

SUBMARINE AND UNDERWATER PIPELINE

Submarine and underwater pipeline for carrying potable water/effluent disposal in to the sea

GAS DISRIBUTION

Natural gas, bio gas, sewage gas, etc

DUST SUPRESSION SYSTEMS

Dust suppression system for haul road, mineral loading platform, mineral handling plant, stock piles..

Top

Salient features of HDPE Pipes

Light Weight The inherent light weight of HDPE pipes provides many cost saving benefits related to handling, storage, hauling , joining and installation. Tough & Strong HDPE pipes are strong as well as resilient to withstand both internal pressure as well as external loads (soil/traffic). Excellent even during water hammer condition to absorb surge pressure as well as thermal stresses. Flexibility Extremely flexible and coilable pipes available in continuous lengths of 50 mtrs. Up to 300 mtrs. In coil length for sizes 16 mm to 110mm OD. Pipes can be laid on undulating lands with maximum radius of curvature/bending up to 25 times of diameter (OD). Quick and Easy Jointing. The butt welding jointing technique provides absolutely leak-proof joint . Being available in coils up to a certain diameter, the quick and easy installation is possible.		Smooth internal Surface By virtue of being extremely smooth oth internal surface it offers considerably low frictional resistance ance to the flowing medium C factor for HDPE pipes is minimum150 and remains constant all throughout its anticipated life. Resistance to Chemicals Totally inert to chemicals from ph-O-14 for almost all fluids (acid/alkali) thereby making it compatible to use even in the most hostile environmental conditions. Wear and Abrasion Resistance. HDPE pipes have excellent resistance to wear/abrasion. HDPE pipes have replaced conventional pipes in slurry-transport systems with excellent performance in flowing even with highly abrasive slurries like iron ore, sand, fly ash etc. Wide range of Choice HDPE pipes available in sizes from 16mm OD to 710 mm OD and are available in 2.5 kg/cm2 to 16b kg /cm2 pressure classes providing a wide option to the designer for optimization of cost.
Other salient features of HDPE piping system over other systems includes no cathodic protection, very less maintenance, easy repair & cleaning if required, availability of wide range of fittings and provision for jointing with other piping systems etc.

Top

Product Details

Interested in this product? Ask for more details & Latest Price from seller

Send Enquiry

Company Details

We are a leading Business House in Industrial Products since 1992 based at Bhubaneswar, Odisha
We are dealing in Industrial products like HDPE Pipes, Industrial Pumps, Valves, Gear Boxes. We are Channel Partners for various MNC’s and reputed companies.
We are also dealing in Industrial Plastics & Plastic Engineering Products as per Client drawings.
We take up Turnkey jobs of Plastic pipelines, Floating Pipelines, Dredging Pipelines, In plant Piping, Cross Country pipelines & Raw water intake lines.
We also take up Turnkey projects for HDPE Geomembrane, Geonet & etc. for Reservoirs, Ash Ponds, Chemical Ponds & etc.