Sales :+91-9953717914|Support :+91-9700318318
Products / Services
  • Products / Services
  • Companies
  • Buy Leads
    Post Buy Requirement
    Hardness Testing Machine

    Hardness Testing Machine

    Get Latest Price
    • Supply TypeManufacturer, Exporter, Supplier, Retailer
    • Preferred Buyer Location All over the world

    Principal : Rockwell, Rockwell superficial & Rockwell cum Brinell tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with....
    View More Details
    Send Enquiry

    Company Information

    MTMS ENGINEERS PRIVATE LIMITED (formerly Known As Material Testing Mac
    location Sanghvi, Pune, Maharashtra
    View Number
    • calendar Member Since 8 Years
    • building Nature of Business Retailer

    Ask for more detail from the seller

    Contact Supplier
    Report incorrect details
    View Company Details

    • Product Details

    • Company Details

    no_img_icon

    Principal :
    Rockwell, Rockwell superficial & Rockwell cum Brinell tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force and then measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value.
    RASNE series machines are suitable for Rockwell, Rockwell superficial & Rockwell cum Brinell tests. These are motorized digital Hardness testers having LCD display for easy hardness measurement. The results are displayed in 0.1 Rockwell unit for more accurate measurement.

     

    Operation : 
    Various parameters of test can be set on front panel by operation of key board and observing LCD display Viz high/low limits, dwell time, auto / manual start, printer selection, scale selection etc. All set data can be verified edited by pressing SCL key one after another.
    Machine operation is very simple. The normal mode is a bar followed by "SET" indication. Raise elevating screw slowly through bar indication till "SET" position which will show "PRESS START" indication. Now press "START" button. Loading/unloading cycle will be completed and hardness is shown on LCD display with High / Good / Low indication. Lower down elevating screw. Panel will show normal mode for next test. Also when required 'AUTO START' on front panel by operation of key board & observing LCD Display then raise elevating screw slowly through bar indication till "SET" position then it will starts loading / unloading cycle automatically & hardness is shown on LCD Display with High / Good / Low indication.
     
    'RASNE' series of Hardness Testing Machines come with much improved design & look with following major design changes.
    		This is motorized machine having automatic loading/unloading cycle suitable for production testing.
     
    The machine body is having a taper front look and a large size read-out in the front. The machine is powder coated for better look. The paint shade do not fade and machine  looks like new over year.
    The elevating screw of machine is guided in a hardened and ground bush, not allowing movement of elevating screw more than 0.05 mm when raised to full height. The accessory is retained for years together due to hardened bush. 
    A hardened and ground stepped bush is fixed on top of main screw for location and rest surface. This guarantees no change in results due to rough handling of test table or test piece. It means a trouble free long life machine accuracy.
    An antifriction linear bearing with almost no clearance is provided for a perfect vertical movement of loading plunger with minimum friction. This enables testing of small dia. Pin or ball upto 3 mm dia.
    These models are provided with automatic working cycle and digital LCD display with 0.1 Rockwell resolution. This insures productivity with better accuracy.
    IS:1586:2000 for Rockwell and superficial test. IS:2281:2005 for Brinell Hardness Test.

     

    Note : For Brinell scale - manually select (187.5 or 250 kgf) with respected ball indentor. At that time take reference of set point only. Apply the load, then measure the impression dia by Brinell microscope only. (No Brinell scale display on screen).
     
    Optional Accessories :
    • Steel ball indentor 1/8", 1/4", 1/2". 
    • Testing Table 20mm dia. 
    • Testing Table 70mm dia. with 'V' groove for round jobs 10 to 80mm dia. 
    • Vari-rest to support add shaped jobs. 
    • Jominy test fixture for end quench test. 
    • Gooseneck Adoptor No.1. 
    • Special diamond indentor suitable for Gooseneck Adoptor No.1. 
    • Short nib diamond indentor suitable for Goodseneck Adoptor No.1. 
    • Gooseneck Adoptor No.2. 
    • Special diamond indentor suitable for Goodseneck Adoptor No.2.
    • Gooseneck Adoptor No.3. 
    • Raised center testing table 15mm dia. 
    • Diamond Spot Anvil. 
    • Cylindron anvil for testing big jobs above 20mm dia. 
    • Eyeball anvil with 25.4mm dia. or 38mm dia. ball. 
    • Gooseneck anvil for pipes 5 to 25mm ID with 5mm step inserts. 
    • Jack rest for long and heavy jobs.


     Model RASNE - 1 RASNET - 1 RASNEB - 1
     Testing Table 50mm dia.  1  1  1
     Testing Table 38mm dia. with 'V' groove for round jobs 6-45 mm dia.  1  1  1
     Diamond indentor - Rockwell RA  1  -  1
     Diamond indentor - Rockwell SF  -  1  -
     Steel Ball Indentor 1/16" with 5 spare balls  1  1  1
     Steel Ball Indentor 2.5 mm with 5 spare balls  -  -  1
     Test Block Rockwell "C"  1  1  1
     Test Block Rockwell "B"  1  1   1
     Test Block HB 2.5 / 187.5  -  -  1
     Test Block HR 30 N  -  1  -
     Allen Spanners  5  5  5 
     Screw Driver  1  1  1
     Clamping Device  1  1   1
     Wooden Box for Std. Accessories  1  1  1
     Telescopic Sleeves for Elevating screw position  1 Set  1 Set  1 Set
     Spare Fuse 1 Amp.  1   1  1
     Power Cable  1  1  1 
     Brinell Microscope  -  -  1
     Machine Cover  1  1  1
     Instruction Manual  1  1  1
         Technical Data :
     ModelUnit RASNE-1 RASNET-1 RASNEB-1
     Major Load  N
     (kgf)     		 588.4, 980.7, 1471
     (60, 100, 150)     		 147.1, 294.2, 441.3, 588.4,  980.7, 1471 (15, 30, 45, 60, 100, 150)   588.4, 980.7, 1471, 1839,  2452  (60, 100, 150, 187.5, 250)
     Minor Load  N  (kgf)  98.07 (10)   29.42, 98.07  (3, 10)  98.07  (10)
     Max.Test height   mm  230  230  230
     Depth of throat  mm   133  133  133
     Net wt. Approx.  kg.  75  77  77
     M/c Dimensions  mm  L-450, W-175, H-627  L-450, W-175, H-627  L-450, W-175, H-627
     
      FIE Motorized Digital Hardness Tester :
      Model RASNE-1 RASNET-1 RASNEB-1
     Type  Digital Rockwell  Digital Rockwell & Rockwell Superficial  Digital Rockwell cum Brinell
     Operation Cycle  Automatic Load/Dwell/Unload  Automatic Load/Dwell/Unload  Automatic Load/Dwell/Unload
     Preliminary Test  Force  98.07N (10 kgf)  29.42N (3kgf) & 98.07N (10kgf)  98.07 N (10kgf)
     Additional Test Force  490.3, 882.6, 1373N (50, 90, 140 kgf)  177.7, 264.8, 441.9, 490.3, 882.6, 
      1373N (12, 27, 42, 50, 90, 140 kgf)     		 490.3, 882.6, 1373, 1471, 2354N 
      (50, 90, 140, 177.5, 240 kgf)
     Total Test Force  588.4, 980.7, 1471N (60, 100, 150 kgf)  141.7, 294.2, 441.3, 588.4, 980.7, 
     1471N (15, 30, 45, 60, 100, 150 kgf)     		 5800.4, 980.7, 1471, 1839, 2452N
     (60, 100, 150, 187.5, 250 kgf)
     Test Force Selection  By external dialing  By external dialing  By external dialing
     Set Position  With LCD bar indicator  With LCD bar indicator  With LCD bar indicator
     Key Board Entry  Through membrane switches for scale, 
     GO-No GO & dwell time selection     		 Through membrane switches for scale,
     GO-ON GO & dwell time selection     		 Through membrane switches for scale,
     GO-ON GO dwell time selection
     Resolution  0.1 Rockwell  0.1 Rockwell or 
      0.1 Rockwell Superficial     		 0.1 Rockwell
     Output  Parallel output for connecting Dot Matrix 
     Printer to get results indicating serial no. of
     tests, hardness scale, hardness value & 
     high/good/low indication     		 Parallel output for connecting Dot Matrix  Printer to get results indicating serial no. of  tests, hardness scale, hardness value & high / good / low indication  Parallel output for connecting Dot Matrix
     Printer to get results indicating serial no. of 
     tests, hardness scale, hardness value & 
     high/good/low indication
     Optional  Serial PD interface & windows software  Serial PC interface & windows software  Serial PC Interface & windows software for 
     only Rockwell scales
     

















    Share your requirements for a quick response!
    Tell us what you need?

    By clicking Get Quotes Now, I accept the T&C and Privacy Policy.

    Looking for Hardness Testing Machine?

    Quantity
    Seller Contact Details
    View Mobile No Send Enquiry
    Waiting for permission
    To search by voice, go to your browser settings and allow access to microphone

    Allow microphone access to search with voice