Listing ID #4007882
Company Information
Ask for more detail from the seller
Contact SupplierWe are one of the leading FRP | GRP Filter housing manufacturer & exporters. Filter Concept Offers Corrosion resistant Fiber Reinforced Plastic (FRP) Filter housing to meet the demanding needs of industry to Filter corrosive and non-corrosive fluids for various applications including Chemicals, Oil and Gas, Petrochemical, Power Generation, Desalination, Potable Water, Municipal and many more Industries.
Operation :
Contaminated fluid enters the housing and is distributed evenly around the filter cartridges/Filter Bags. Filtration takes place from outside to inside or Inside to outside depending upon flow patterns. Solids are collected on the outside of filter cartridges or Inside of the Filter Bags & clear filtrate is collected at outlet.
Special Options
Customized design available
Positive sealing arrangement to avoid bypassing
ASME Designs available
Sizes (FRP/GRP filter housings suitable for Cartridge Filter)
1 No. To 250 Nos. Of Cartridges in Single Housing
2” , 2.5” , 4” , 6” & 8” Diameter of Cartridge
10” , 20” , 30” , 40” , 50” & 60” Length of Filter cartridge
Sizes (FRP/GRP filter housings suitable for Bag Filter)
FRP/GRP Bag filter system suitable for
Ø 4" x 10" Long Filter Bag
Ø 4" x 17" Long Filter Bag
Ø 7" x 17" Long Filter Bag
Ø 7" x 32" Long Filter Bag
Multiple bag filter system suitable for
2 Nos. Of Ø 7” x 32” Long Filter Bag
3 Nos. Of Ø 7” x 32” Long Filter Bag
4 Nos. Of Ø 7” x 32” Long Filter Bag
5 Nos. Of Ø 7” x 32” Long Filter Bag
6 Nos. Of Ø 7” x 32” Long Filter Bag
7 Nos. Of Ø 7” x 32” Long Filter Bag
8 Nos. Of Ø 7” x 32” Long Filter Bag
9 Nos. Of Ø 7” x 32” Long Filter Bag
Flow Rate
Capacity: Up to 1000 m3 /hr & more
Material Of Cunstruction {M O C}
Fiber Reinforced Plastic ( FRP)
Glass fiber Reinforced Plastic ( GRP )
POLYPROPYLENE
Cartridge filter housing suitable for filter cartridges of
Double Open End (DOE) Type
Code 7 (226 O' Ring) Design
Code 3 (222 O' Ring) Design
NPT Threaded Connection Type
Gasket / O Ring Material
Neoprene
Nitrile
Silicone
Viton
Buna N
EPDM
PTFE
Spiral Wound
CAF
End connections available
NPT / BSP Threaded
Flanged Table E / Table F
ANSI B 16.5 Flanged
DIN Standard