BnG Specialize in design, Supply and Installation of vertical and inclined ground anchors to meet the project’s requirements-

Ground Anchors are basically devices used to transmit the forces to the soil by means of Pre-Stressed tendon to anchor the Structure to the ground or to retain the slopes from collapsing and uplift

*  High capacity - Anchors utilize a 0.5” &0.6” (12.7mm/15.2mm) strand. The number of strands per anchor dictate the load carrying capacity of the anchor.

*  Lightweight - For a Class I protected anchor, the corrugated duct is grouted in the field, greatly reducing the weight of the anchor. There is more load carrying capacity of 7-wire strand than solid bar.

*  Anchors arrive to the jobsite fully fabricated and packaged in coils to allow for installation in areas where there are clearance issues or bench width constraints.

*  Unlike bar systems, strand can be produced in any length.

*  Strand anchors utilize a small diameter greased filled extruded high density polyethylene sheathing, allowing for a greater number of individual strands to be contained in a given drill hole size. Manual greasing and sheathing of individual strands require a larger free stressing sheath.

* Dam Tie-Downs.
* Temporary Excavation Support.
* Landslide Mitigation.
* Permanent Tieback Systems.
* Slope Surface Stabilization.
* Foundations.

BnG Specialize in design, Supply and Installation of vertical and inclined ground anchors to meet the project’s requirements-

Ground Anchors are basically devices used to transmit the forces to the soil by means of Pre-Stressed tendon to anchor the Structure to the ground or to retain the slopes from collapsing and uplift

*  High capacity - Anchors utilize a 0.5” &0.6” (12.7mm/15.2mm) strand. The number of strands per anchor dictate the load carrying capacity of the anchor.

*  Lightweight - For a Class I protected anchor, the corrugated duct is grouted in the field, greatly reducing the weight of the anchor. There is more load carrying capacity of 7-wire strand than solid bar.

*  Anchors arrive to the jobsite fully fabricated and packaged in coils to allow for installation in areas where there are clearance issues or bench width constraints.

*  Unlike bar systems, strand can be produced in any length.

*  Strand anchors utilize a small diameter greased filled extruded high density polyethylene sheathing, allowing for a greater number of individual strands to be contained in a given drill hole size. Manual greasing and sheathing of individual strands require a larger free stressing sheath.

* Dam Tie-Downs.
* Temporary Excavation Support.
* Landslide Mitigation.
* Permanent Tieback Systems.
* Slope Surface Stabilization.
* Foundations.